Body Code OBD II B1175

Reply Subscribe

Thread Tools

Search this Thread

Apr 15, 2009 | 03:29 PM

Evan W

Guest

Posts: n/a

Body Code OBD II B1175

Does anyone have any idea what B1175 is? I pulled it today with my code reader, and all the B codes online seem to start at 1200... what's the deal?

Apr 15, 2009 | 06:30 PM

mohrd

Veteran Member

Joined: Jun 2008

Posts: 2,015

Likes: 119

From: Sylvan Lake & Playa del Carmen Mexico

Perhaps post in the Tech Help section in case Techs aren't looking at X-Type today. My AllData starts B codes @ 1200 so I'm no help.

Apr 16, 2009 | 08:50 AM

Evan W

Guest

Posts: n/a

good news for those whose readers read incorrectly, its actually C1175 Speed Wheel Sensor LR Input Circuit Failure, even though it reads b, which also explains the abs light

thanks

Apr 16, 2009 | 09:01 AM

JagXV6

Senior Member

Joined: Aug 2008

Posts: 326

Likes: 16

Bad news is you need a new LR outer CV joint! The sensors don't go bad. There is a speed sensor ring that corrodes, breaks, and no longer works wit the sensor. Only way to fix it is to replace the outer CV joint $175 or the whole alxe, about $870. (Plus labor if you do not do it yourself.) I went through this (as have many others) last fall. I replaced the outer CV joint myself.

https://www.jaguarforums.com/forum/s...ighlight=c1175

Check that link for all fun details!

Last edited by JagXV6; Apr 16, 2009 at 09:32 PM.

Apr 20, 2009 | 03:59 PM

Evan W

Guest

Posts: n/a

sounds like a great way to spend an afternoon, thanks!!

appreciate the help

Apr 20, 2009 | 04:05 PM

Evan W

Guest

Posts: n/a

wow just really got into your reply, im going to use your last post as a printout to do it

thanks for making my tool selection faster too! Much appreciated.

Apr 20, 2009 | 06:35 PM

JagXV6

Senior Member

Joined: Aug 2008

Posts: 326

Likes: 16

Well please make sure it is in fact the wheel sensor ring that is bad B4 you go and do it.
That is the common failure--but it could be a broken sensor or wire, but not likely. You can look through a hole in the back where the axle goes through--the ring will be split and may be totally missing. I'd think you would have the speedo problem like I did if it was totally missing.

Glad my post was helpful--I got lots of help from the others here and am only too happy to be giving some back!