While working on my coolant upgrade kit from euro amp, I decided to change the engine oil cooler gasket (not sure this was really necessary) after watching a youtuber do this.
Said youtuber didn't torque anything to spec.
Does anyone happen to know the torque setting for the oil cooler?
I know there is a great guide on here for the coolant rebuild, but I don't recall it touching on the oil cooler.
Any leads would be much appreciated

Andre

 

I was able to find the info I needed over on the F-type side of things, thanks to dropbox parts manual.
It's 13nm if anyone ever needs the info.

 

The tightening sequence is also important.





Graham