XJ ( X351 ) 2009 - 2019

The center glovebox won’t close

Thread Tools
 
Search this Thread
 
  #1  
Old 12-06-2017, 10:33 AM
loulizjag's Avatar
Member
Thread Starter
Join Date: Mar 2012
Location: france
Posts: 63
Received 3 Likes on 3 Posts
Default The center glovebox won’t close

Hey guys, i think i have the devil in this car, so many problems. My center glovebox wont close, anybody had this problem ? Anybody knows if i have to change all of it or the pin can be sold seperatly at jaguar ?
Eventually how tonopen and repair
Thanks to all

 

Last edited by loulizjag; 12-06-2017 at 10:35 AM.
  #2  
Old 12-06-2017, 12:29 PM
Stuart S's Avatar
Veteran Member
Join Date: Aug 2010
Location: Atlanta suburbs
Posts: 9,386
Received 6,398 Likes on 3,504 Posts
Default

It's an easy DIY fix. Here's how to do it. See my 2/28/2017 thread: https://www.jaguarforums.com/forum/x...-fixed-177536/

P.S. Don't use any lubricant, as dust will stick to it and will cause the latch to get stuck again. Use a can of compressed air similar to this:
https://www.amazon.com/Falcon-Dust-Off-Electronics-Dust-Remover/dp/B00PV1K0IA/ref=sr_1_23?s=electronics&ie=UTF8&qid=1512585217&sr=1-23&keywords=compressed+air+duster+for+electronics https://www.amazon.com/Falcon-Dust-Off-Electronics-Dust-Remover/dp/B00PV1K0IA/ref=sr_1_23?s=electronics&ie=UTF8&qid=1512585217&sr=1-23&keywords=compressed+air+duster+for+electronics
 

Last edited by Stuart S; 12-06-2017 at 12:36 PM. Reason: Added P.S.
  #3  
Old 12-07-2017, 12:13 PM
jschimmels's Avatar
Member
Join Date: Aug 2016
Location: Dallas, TX
Posts: 78
Received 6 Likes on 4 Posts
Default

Thanks for the solution. Jaguar service wanted $800 to fix the same thing.
 
  #4  
Old 12-07-2017, 05:45 PM
Stuart S's Avatar
Veteran Member
Join Date: Aug 2010
Location: Atlanta suburbs
Posts: 9,386
Received 6,398 Likes on 3,504 Posts
Default

Ouch!
 
  #5  
Old 12-07-2017, 06:22 PM
jschimmels's Avatar
Member
Join Date: Aug 2016
Location: Dallas, TX
Posts: 78
Received 6 Likes on 4 Posts
Default

They would not cover it under CPO warranty which really made me mad. Is this really a wear item?
 
  #6  
Old 12-07-2017, 09:07 PM
Stuart S's Avatar
Veteran Member
Join Date: Aug 2010
Location: Atlanta suburbs
Posts: 9,386
Received 6,398 Likes on 3,504 Posts
Default

Read your CPO warranty terms snd conditions and exclusions. If you do not have that complete document, ask your dealer to provide you with a complete copy and to cite the specific language that supports his conclusion that this is a normal wear item.

Without reading that CPO warranty, I find it difficult to equate a latch mechanism with a tire, fan belt, brake pad. radiator hose, or other part usually considered to be a normal wear and tear item.

The CPO contract controls, not the service advisor's opinion.
 
  #7  
Old 04-01-2018, 11:20 PM
gagman66's Avatar
Senior Member
Join Date: Nov 2016
Location: Metro Atlanta
Posts: 158
Received 10 Likes on 9 Posts
Default Loose spring on latch

After removing the console surround I discovered the spring had detached.


Can someone please explain/show me how it reattaches.


TIA,
Rodney
 
  #8  
Old 04-02-2018, 11:16 AM
XJsss's Avatar
Veteran Member
Join Date: Jan 2012
Location: Reynolds Lake Oconee, GA USA
Posts: 1,817
Received 516 Likes on 414 Posts
Default

Hope these two illustrations help.
 
Attached Files
  #9  
Old 04-02-2018, 01:05 PM
gagman66's Avatar
Senior Member
Join Date: Nov 2016
Location: Metro Atlanta
Posts: 158
Received 10 Likes on 9 Posts
Default

Originally Posted by gagman66
After removing the console surround I discovered the spring had detached.


Can someone please explain/show me how it reattaches.


TIA,
Rodney


I should have been more specific when referring to the spring. The spring that goes on the hook/locking mechanism came loose, not the spring on the release push-button.
 
  #10  
Old 04-02-2018, 10:20 PM
gagman66's Avatar
Senior Member
Join Date: Nov 2016
Location: Metro Atlanta
Posts: 158
Received 10 Likes on 9 Posts
Default

Originally Posted by gagman66
I should have been more specific when referring to the spring. The spring that goes on the hook/locking mechanism came loose, not the spring on the release push-button.

Please see photos below:
 
Attached Thumbnails -img_2843.jpg   -img_2844.jpg   -img_2845.jpg   -img_2848.jpg   -img_2849.jpg  

  #11  
Old 04-07-2018, 10:57 PM
gagman66's Avatar
Senior Member
Join Date: Nov 2016
Location: Metro Atlanta
Posts: 158
Received 10 Likes on 9 Posts
Default

Originally Posted by gagman66
Please see photos below:


I figured it out. Thanks.
 
  #12  
Old 04-08-2018, 10:08 AM
XJsss's Avatar
Veteran Member
Join Date: Jan 2012
Location: Reynolds Lake Oconee, GA USA
Posts: 1,817
Received 516 Likes on 414 Posts
Default

Really glad to hear that you figured it out, but it may help others here if you either explain what you did or document the procedure so that in the future it may help other owners
 

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:03 PM.