Hello everyone my name is Steve I'm the proud owner of a 2003 xj6 sport.
I've sorted out most of the work on the car only the rear discs and pads and fit Bluetooth. Now I'm starting to do some research on retro fitting voice my stack in the boot is as follows.
Sat navigation dvd
Cd changer
Phone
The car also is fitted with an alpine stereo system.
To add voice I understand that I'll have to replace the d2b cable with a five way is this correct??
Does anybody know if the car is fitted with the voice module harness??
If not then where does it connect to??
Under the back seat?? Or c piller??
If anyone has retro fitted a voice module please can you give me some advice. Yours sincerely Steve Evans

 

Hi Steve,

Welcome to the Jaguar Forums! It's great to have you with us.

We do have members who have retrofitted Voice Activated Control, so to help them find your inquiry I have taken the liberty of re-titling your post to reflect the nature of your questions.

A new member introduction, which is what most members would have assumed your post was under your original title, should be posted in the New Member Area - Intro a MUST - Jaguar Forums - Jaguar Enthusiasts Forum. Please take a moment to post an introduction there so we can learn something about you and your Jag and give you a proper welcome:

Cheers,

Don

 

I have done what you want to do on my 2005 XJR. I do not know what differences/ similarities there are between the two models.

However the D2B fiber optic cabling is a continuous loop and components in that loop have to be in the correct order. It is relatively easy to add in DB2 fiber cabling.

Also in my trunk the electrical connections for VACM and Jaguar Bluetooth were already in place just taped up behind the stack in the trunk.

Also a microphone and an aerial are requirements.