Replacing the transmission cooler lines without dropped the steering rack?
Thread Starter
|
Senior Member
Joined: Mar 2013
Posts: 171
Likes: 60
From: Oklahoma
Replacing the transmission cooler lines without dropping the steering rack?
First, I understand this is possible.
How is it done?
Do the lines go in from the rear towards front, or vice versa?
Any details from anyone who has done this would be brilliant.
Thank you!
How is it done?
Do the lines go in from the rear towards front, or vice versa?
Any details from anyone who has done this would be brilliant.
Thank you!
Last edited by SaturnV; Nov 5, 2013 at 01:21 AM.
Thread Starter
|
Senior Member
Joined: Mar 2013
Posts: 171
Likes: 60
From: Oklahoma
*crickets*
With the number of views, there is obviously some interest in this. Here's all I could come up with, from a very helpful forum member:
• A lift will help a lot
• The lines go in Rear to Front
• Steering rack can stay
• Motor must be jacked up and LHS motor mount and bracket are removed
HTH someone
With the number of views, there is obviously some interest in this. Here's all I could come up with, from a very helpful forum member:
• A lift will help a lot
• The lines go in Rear to Front
• Steering rack can stay
• Motor must be jacked up and LHS motor mount and bracket are removed
HTH someone
Last edited by SaturnV; Nov 6, 2013 at 01:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
rusty37
XJ6 & XJ12 Series I, II & III
10
Jun 7, 2016 04:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)