This is all I can dig up but nothing for F.

A= ABS Control Module
B= Body Processor Module
D=Driver Seat Control Module
E=Engine Control Module
I=Instrument Pack
K=Passenger Rear Door Control Module
P=Passenger Seat Control Module
R=Driver Rear Door Control Module
S=Security and Locking Control Module
T=Transmission Control Module
DD=Driver Door Control Module
PD=Passenger Door Control Module

 

Lots of info in the large file area including many TSBs.
More info about the problem would help.
Did you try Engineering Test Mode for more info into the INST PK??
Can't hurt, just read the TSB to under stand what you are looking at.

WDS, IDS or SDD would help to scan ALL modules.

bob

 

I can't enter Engineering Test Mode.

The last time Config F came up I was able to reflash the ECM and it went away. I've had 4 failed ECM reflash's, I can't do much programing now with out this happening.

<a href="http://s69.photobucket.com/user/CarBizindio/media/forum%20pics/IMG_4092_zpspadu4qzn.jpg.html" target="_blank"><img src="http://i69.photobucket.com/albums/i73/CarBizindio/forum%20pics/IMG_4092_zpspadu4qzn.jpg" border="0" alt=" photo IMG_4092_zpspadu4qzn.jpg"/></a>

my modules are bipolar

<a href="http://s69.photobucket.com/user/CarBizindio/media/forum%20pics/IMG_4090_zpsefdkpncs.jpg.html" target="_blank"><img src="http://i69.photobucket.com/albums/i73/CarBizindio/forum%20pics/IMG_4090_zpsefdkpncs.jpg" border="0" alt=" photo IMG_4090_zpsefdkpncs.jpg"/></a>

My codes are no help

<a href="http://s69.photobucket.com/user/CarBizindio/media/forum%20pics/IMG_4091_zpshrhvt6eq.jpg.html" target="_blank"><img src="http://i69.photobucket.com/albums/i73/CarBizindio/forum%20pics/IMG_4091_zpshrhvt6eq.jpg" border="0" alt=" photo IMG_4091_zpshrhvt6eq.jpg"/></a>

Car runs great, no problems. I have a feeling this problem is to complex for my skill level, bummer.