Replacing Headlight Washers
#1
Replacing Headlight Washers
Hi there. I'm a nubi to the site from Whitby, Ontario Canada. Has anyone ever replaced headlight washers on an XJ6? I have a 1997 in great shape but have busted washer housings on the front bumper. I'm pretty handy with tools. Is it very difficult to do? Any special equipment required? Thanks in advance for any assistance anyone can provide.
#2
The following users liked this post:
Pgallag (11-21-2012)
#3
#4
The whole Jet Assembly (circled in blue), not just the nozzles (circled in red)?
On my later X308, the Jet Assembly was secured to the Bumper with two fixing screws going down into the Bumper from the top. The chromed plastic cover then snapped on top.
My X300 didn't have Powerwash and, although I've seen them on other X300's, have never had occasion to remove them. The diagram from the Parts Manual suggests it's a different fixing method.
Can you post a pic of the underside of the base of the Jet Assembly to give a clue as to how it may be meant to secure?
Graham
On my later X308, the Jet Assembly was secured to the Bumper with two fixing screws going down into the Bumper from the top. The chromed plastic cover then snapped on top.
My X300 didn't have Powerwash and, although I've seen them on other X300's, have never had occasion to remove them. The diagram from the Parts Manual suggests it's a different fixing method.
Can you post a pic of the underside of the base of the Jet Assembly to give a clue as to how it may be meant to secure?
Graham
Thread
Thread Starter
Forum
Replies
Last Post
al_roethlisberger
XJ XJ6 / XJR6 ( X300 )
7
09-11-2015 10:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)