XJ XJ8 / XJR ( X308 ) 1997 - 2003

Vacuum routing help

Thread Tools
 
Search this Thread
 
  #1  
Old 07-02-2011, 02:36 PM
willy574's Avatar
Junior Member
Thread Starter
Join Date: May 2010
Location: florida
Posts: 13
Received 0 Likes on 0 Posts
Default Vacuum routing help

Hello everyone, happy 4th. I need some help. The previous owner of my 1998 xj8 left me a mess. They pulled out all the vacuum lines from the engine an i cannot locate the proper routing. I need to know starting at the vacuum reserve tanks(below air box) the way they go. they should continue to intake, fuel pressure regulator, throttle body and continue to valves(under drivers side cover, next to brake booster) I cannot determine how and where all of these spit (tee) off. Please can anyone take a look at theirs and detail this for me. Nothing is connected even to throttle body, not to mention if i push cruise switch it causes system to go into limp mode. Thanks agin for any help.
 
  #2  
Old 07-02-2011, 04:34 PM
sparkenzap's Avatar
Veteran Member
Join Date: Nov 2007
Location: atlanta ga
Posts: 4,502
Received 1,064 Likes on 867 Posts
Default

Have you looked in JTIS for the schematic diagram? I do not have an AJ-26 NA and the AJ27 or AJ26 SC are different, I suppose.
 
The following users liked this post:
willy574 (07-02-2011)
  #3  
Old 07-02-2011, 05:22 PM
willy574's Avatar
Junior Member
Thread Starter
Join Date: May 2010
Location: florida
Posts: 13
Received 0 Likes on 0 Posts
Default vacuum routing

Thanks for reply, I had checked through JTIS and could no locate any vacuum routing diagrams and the sticker under hood was to vague to understand exact routing. I was hoping someone could look under their hood an describe the route. thanks again.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
richard bowles
XJ6 & XJ12 Series I, II & III
6
06-10-2023 12:24 AM
tomkilner
XJ XJ6 / XJR6 ( X300 )
16
10-09-2015 07:10 AM
Johncy2000
XJ ( X351 )
4
10-02-2015 01:05 AM
thedugger1
XJ6 & XJ12 Series I, II & III
3
09-26-2015 10:27 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Vacuum routing help



All times are GMT -5. The time now is 06:04 PM.