XJ40 ( XJ81 ) 1986 - 1994

Teardrop Center covers

Thread Tools
 
Search this Thread
 
Old Jun 4, 2022 | 09:52 PM
  #1  
LnrB's Avatar
Thread Starter
|
Veteran Member
10 Year Member
Liked
Loved
Community Favorite
Joined: Mar 2014
Posts: 26,759
Likes: 10,309
From: Tehama County, California, USA
Default Teardrop Center covers

Hello,
I'm slithering over from the Xj6 Series section next door.
I have Xj-40 rims on my car, and one of the moon covers fell off on the road the other day.
Of course I didn't notice until today in my garage, and what's left looks Terrible!


A cover like this was glued on, this is one of the rear plastic ones.

I've searched Google, who sent me to SNG Barratt and Moss, they only have the rear, and eBay, the seller of course is out of stock. Amazon doesn't even have them which surprises me a bit.

Can anyone here point me in a better direction?
(';')
 
Reply
Old Jun 5, 2022 | 04:28 PM
  #2  
LnrB's Avatar
Thread Starter
|
Veteran Member
10 Year Member
Liked
Loved
Community Favorite
Joined: Mar 2014
Posts: 26,759
Likes: 10,309
From: Tehama County, California, USA
Default

Never mind, I got it figured out...........
(';')
 
Reply
Old Jun 5, 2022 | 07:32 PM
  #3  
jerry_hoback's Avatar
Veteran Member
15 Year Member
Liked
Loved
Community Favorite
Joined: May 2007
Posts: 3,489
Likes: 1,265
From: Indiana
Default

Aw! I was about to go search through my bag of tricks. But Good deal.
 
Reply
Old Jun 5, 2022 | 08:12 PM
  #4  
LnrB's Avatar
Thread Starter
|
Veteran Member
10 Year Member
Liked
Loved
Community Favorite
Joined: Mar 2014
Posts: 26,759
Likes: 10,309
From: Tehama County, California, USA
Default

Thank you Jerry,
I only took the guy's word that the rear covers, of which he included a spare, wouldn't work on the front as they would interfere with the bearing cups. He's been wrong about SO much regarding this car (I wouldn't like to say he deliberately misled me) that I decided to check for myself if it was true.

It's NOT!

There's Plenty of clearance for the center badge! So I ordered another from SNG Barratt as they seem to have them in stock. (Just another payment on a Classic Jag. Ya have to do that once in a while)

So now I only need to find center badges. That shouldn't be all that hard.
(';')
 
Reply
Old Jun 10, 2022 | 03:28 AM
  #5  
SleekJag12's Avatar
Veteran Member
10 Year Member
Community Favorite
Joined: Dec 2012
Posts: 2,058
Likes: 1,076
From: Scottsdale, AZ, USA
Default

Hey Elinor,

I didn't know those were XJ40 vintage, but I won't tell anyone. I do like them very much.

If thats the factory glue job, it leaves something to be desired. Unless you consider it fair to last as long as it did! Are you now on a mission to attempt re-securing the other lids to avoid another embarrassing wardrobe malfunction as this?
 
Reply
Old Jun 10, 2022 | 08:18 AM
  #6  
LnrB's Avatar
Thread Starter
|
Veteran Member
10 Year Member
Liked
Loved
Community Favorite
Joined: Mar 2014
Posts: 26,759
Likes: 10,309
From: Tehama County, California, USA
Default

Hello, Richard, and thank you.
NO! I am Not considering any attempt to reattach the outer covers. I do think it was amazing it lasted this long. As far as I know, these have been on the car since 1986 when all the conversion work was done by the PO.

I have ordered more of the plastic covers that were on the rear as they fit the front Just Fine! I will be ditching the "original" cap on the other side for a far more secure one from SNG Barratt, which is in the pipeline. I already have the center badges in hand.

I have ordered 3, as these are swiftly entering the realm of Unobtainium, and, as they're merely Plastic, one could easily break while being taken on or off the car.
(';')
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
uh2
XJ ( X351 )
10
Dec 18, 2023 05:10 AM
1983turbojaguarxj6
XJ6 & XJ12 Series I, II & III
16
Oct 22, 2023 09:00 AM
iramphal
XJ6 & XJ12 Series I, II & III
7
Jan 9, 2021 09:15 AM
E-Type Erik
E type ( XK-E )
14
Aug 27, 2020 09:42 PM
moronthethrottle
XJ6 & XJ12 Series I, II & III
2
Feb 13, 2009 12:41 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 02:51 AM.