Tooth count and pattern on 1994 XJ40 crankpulley for CPS
Thread Starter
|
Senior Member
Joined: Sep 2013
Posts: 538
Likes: 180
From: NE Ohio, USA
Tooth count and pattern on 1994 XJ40 crankpulley for CPS
Can anyone here tell me the tooth count and the pattern for the toothed wheel or otherwise called the reluctor ring on the crankshaft pulley that is picked up by the crankshaft position sensor? I seem to recall that there are 60 teeth with three missing teeth where each missing tooth is 120 degrees apart. But confirmation of this would be helpful.
--
Steve
--
Steve
Veteran Member
Joined: Sep 2012
Posts: 2,729
Likes: 1,910
From: Victoria BC Canada
Can anyone here tell me the tooth count and the pattern for the toothed wheel or otherwise called the reluctor ring on the crankshaft pulley that is picked up by the crankshaft position sensor? I seem to recall that there are 60 teeth with three missing teeth where each missing tooth is 120 degrees apart. But confirmation of this would be helpful.
--
Steve
--
Steve
Larry
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
