Hazards not working....can't find relay or fuse to check....need location of both please!

 

You've got a light green wire that runs from the #3 fuse to the hazard switch. Check for power there first. There's also a brown/orange wire that runs from the cylindrical hazard flasher unit to the number 4 fuse.

The original XJ service manual has the best wiring diagram. I find Haynes very hard to read.

 

Thank you Adrian for the tip. As is the case most of the time the simplest fix is usually the fix that is required. In this case a cleaned up hazard relay did the trick. Thanks