Plug Gapping on a Lump series 1 chevy 350
#1
Plug Gapping on a Lump series 1 chevy 350
Hello all,
Once again I come to the wise men for advise on my 73 conversion. I am replacing the spark plugs but have no idea what to gap them to.(OR if I should gap them at all) I know there are some things that matter, i.e. compression, etc. So I will give you what I know. If you could tell me what you think the gap should be, I would be grateful!
Chevy 350 bored .60 over
9.6-1 compression
last used autolite #26 spark plugs
pistons hypereutectic 4.060
Edlebrock 600 cfm carb
electric choke
performance HEI ignition and wires
Once again I come to the wise men for advise on my 73 conversion. I am replacing the spark plugs but have no idea what to gap them to.(OR if I should gap them at all) I know there are some things that matter, i.e. compression, etc. So I will give you what I know. If you could tell me what you think the gap should be, I would be grateful!
Chevy 350 bored .60 over
9.6-1 compression
last used autolite #26 spark plugs
pistons hypereutectic 4.060
Edlebrock 600 cfm carb
electric choke
performance HEI ignition and wires
#2
Join Date: Oct 2009
Location: Perth Ontario Canada
Posts: 11,058
Received 2,255 Likes
on
1,840 Posts
The following users liked this post:
Socal (10-21-2014)
Thread
Thread Starter
Forum
Replies
Last Post
aholbro1
XJ XJ6 / XJR6 ( X300 )
17
08-05-2021 05:02 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)