'90 v12 Starter harness
Thread Starter
|
Member
Joined: Jul 2013
Posts: 55
Likes: 4
From: New Jersey
'90 v12 Starter harness
Good morning
its time to replace the starter and I'm going to make a new starter harness to replace the old one and insulate the terminals with ps870. Just a quick question; what's the best wire gauge to use? I'm looking at the original and thinking for longevity I might go up a size.
its time to replace the starter and I'm going to make a new starter harness to replace the old one and insulate the terminals with ps870. Just a quick question; what's the best wire gauge to use? I'm looking at the original and thinking for longevity I might go up a size.
Veteran Member
Joined: Jul 2012
Posts: 6,796
Likes: 2,403
From: Walnut Creek, California
Considering Jaguar's propensity of going light on electrics, I would just go one size bigger. I recently did something similar on my a bit different car. Both the cable and the wire up one.
Carl
Carl
