Torque Wrench settings for Caliper Bolts
Senior Member
Joined: May 2011
Posts: 159
Likes: 38
From: Greenwood, AR
Caliper to Vertical Link - M12 bolt - 50-60 Lbs Ft. Front suspension.
Calipers to drive unit flange - opt.axle, M12 bolt - 50-60 Lbs Ft Rear Suspension
Calipers to drive unit flange std. axle, 7/16v in UNF bolt - 49-55 lbs ft. Rear Suspension
Page 28 06-2 jaguar ROM AKM 3455 Ed 4/3
Calipers to drive unit flange - opt.axle, M12 bolt - 50-60 Lbs Ft Rear Suspension
Calipers to drive unit flange std. axle, 7/16v in UNF bolt - 49-55 lbs ft. Rear Suspension
Page 28 06-2 jaguar ROM AKM 3455 Ed 4/3
Thread Starter
|
Veteran Member
Joined: Feb 2013
Posts: 17,809
Likes: 3,945
Caliper to Vertical Link - M12 bolt - 50-60 Lbs Ft. Front suspension.
Calipers to drive unit flange - opt.axle, M12 bolt - 50-60 Lbs Ft Rear Suspension
Calipers to drive unit flange std. axle, 7/16v in UNF bolt - 49-55 lbs ft. Rear Suspension
Page 28 06-2 jaguar ROM AKM 3455 Ed 4/3
Calipers to drive unit flange - opt.axle, M12 bolt - 50-60 Lbs Ft Rear Suspension
Calipers to drive unit flange std. axle, 7/16v in UNF bolt - 49-55 lbs ft. Rear Suspension
Page 28 06-2 jaguar ROM AKM 3455 Ed 4/3
Many Thanks
Veteran Member
Joined: Jan 2012
Posts: 14,526
Likes: 10,699
From: France
Just FYI for anyone who is not sure, the threads on the caliper bolts are indeed metric, but metric FINE thread, not the normal off the shelf metric thread. Quite a few people assume they are UNF because they look very like it, but are not.
Greg
Greg
