2009 XKR Need the part number and source if you have one for the rubber seal to the intake (large one shown in photo on the right, not the two outer ones, mine disintegrated during a/c recharge...I've looked at lots of schematics/ they show the aluminum splitter but not the rubber seal. HELP GREATLY APPRECIATED august@augustguns.com

 

If you search the threads here, you’ll find that many have made do with plumbing parts from a hardware store, like Home Depot. Maybe a bit of cutting and trimming to get the right fit.

 

Yep, anything that fits. You can measure the top of the throttle body and take the intake part along to all the stores to find something. I used a SPECTER part from Auto Zone for my 2010. It came with two worm clamps, so bonus. It is also made for automobiles, so okay for heat and such.

 

The hose is only available with the tee piece (last time I checked it was around $1k).