Protecting bolts from corrosion?
#1
Protecting bolts from corrosion?
Hi,
I have opened the cam covers in my 2003 XKR in order to replace the gaskets etc. All the retaining bolts and grommets were pretty badly corroded so I'm replacing them with new ones as well. Just wondering if there's a good way to prevent this sort of corrosion from happening again?
Ta,
Kari
I have opened the cam covers in my 2003 XKR in order to replace the gaskets etc. All the retaining bolts and grommets were pretty badly corroded so I'm replacing them with new ones as well. Just wondering if there's a good way to prevent this sort of corrosion from happening again?
Ta,
Kari
#2
I wire brushed the bolt head plating to a like new appearance but I do not know how long that will last.
My understanding is that the rearmost upper bolt on both banks is "special" in that its alloy will not interfere with the nearby cam sensor. (will someone more knowledgeable, please correct me if I am wrong)
My understanding is that the rearmost upper bolt on both banks is "special" in that its alloy will not interfere with the nearby cam sensor. (will someone more knowledgeable, please correct me if I am wrong)
Last edited by Dr. D; 06-22-2017 at 03:00 PM. Reason: clarity
#3