XK8 / XKR ( X100 ) 1996 - 2006

same engine block 4.0 XK8/XKR?

Thread Tools
 
Search this Thread
 
Old Aug 24, 2017 | 10:33 AM
  #1  
forselv's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2012
Posts: 4
Likes: 0
From: thailand
Default same engine block 4.0 XK8/XKR?

dear all

I do have a problem with 4.0 XKR block.

Can I use a XK8 block?

If so can crankshaft, rods or other internals be used as well?


Hope someone can help me.
 
Reply
Old Aug 24, 2017 | 11:13 AM
  #2  
dsnyder586's Avatar
Veteran Member
Joined: Jun 2011
Posts: 2,134
Likes: 543
From: Costa Mesa, CA
Default

Same EXCEPT pistons are dished for the XKR and there are two holes in the pan for an oil cooler on the XKR (and SOME XK8s) Also (hopefully obviously) there is no VVT on XKR cams.
 
Reply
Old Aug 24, 2017 | 11:29 AM
  #3  
forselv's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2012
Posts: 4
Likes: 0
From: thailand
Default

Thank you dsnyder586!

Sounds good!

Just change the sup pan, keep the rods and change the pistons means I can use the entire short block, right?
 
Reply
Old Aug 24, 2017 | 12:44 PM
  #4  
dsnyder586's Avatar
Veteran Member
Joined: Jun 2011
Posts: 2,134
Likes: 543
From: Costa Mesa, CA
Default

Yes.
 
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:41 PM.