Jaguar Forums - Jaguar Enthusiasts Forum
Share Your Pictures with Our Community. Upload Now
0 2023/05/10 09:14:34
0 2023/05/10 09:14:11
0 2023/05/10 09:13:48
25 psi at tick over
25 psi at tick over
0 2023/05/10 09:06:48
40 psi at 3000 rpm.
40 psi at 3000 rpm.
0 2023/05/10 09:06:43
Oil pressure relief valve.
Oil pressure relief valve.
0 2023/05/10 09:06:22
Les than 40 psi at 3000 rpm.
Les than 40 psi at 3000 rpm.
0 2023/05/10 09:06:06
Zero psi on tick over
Zero psi on tick over
0 2023/05/10 09:06:00
Oil filter housing with screw on filter modification.
Oil filter housing with screw on filter modification.
0 2023/05/10 09:05:32
0 2023/05/10 07:08:45
0 2023/05/10 06:51:18
0 2023/05/10 06:50:42
Advertisement
0 2023/05/10 06:26:42
0 2023/05/10 05:25:51
0 2023/05/10 05:25:25
0 2023/05/10 05:24:59
On AZ Route 66 plates as well.
On AZ Route 66 plates as well.
0 2023/05/10 04:49:35
0 2023/05/10 03:35:50
0 2023/05/10 03:18:16
Looking totally innocent, as if nobody had thought of a custom hit job...
Looking totally innocent, as if nobody had thought of a custom hit job...
0 2023/05/10 03:18:12
Artwork by Priv
Artwork by Priv
0 2023/05/10 02:58:17
0 2023/05/10 02:55:53
0 2023/05/10 02:29:55
Painted inside, top and bottom with final colour and sat in a high build primer waiting for the top coat.
Painted inside, top and bottom with final colour and sat in a high build primer waiting for the top coat.
0 2023/05/10 01:24:39
My shell completely stripped at the blasters.
My shell completely stripped at the blasters.
0 2023/05/10 01:23:17
0 2023/05/10 00:32:17
It was a fun project and I think I'm really going to enjoy the finished product. Best of all, I saved a TON of $ by finding this wing at a used auto parts business!
It was a fun project and I think I'm really going to enjoy the finished product. Best of all, I saved a TON of $ by finding this wing at a used auto parts business!
0 2023/05/09 21:50:33
After the soft fitting, parts will be removed and sent to the painter. I'm still debating if I should paint the lower wind deflector or not (I kinda dig it in black) ......
After the soft fitting, parts will be removed and sent to the painter. I'm still debating if I should paint the lower wind deflector or not (I kinda dig it in black) ......
0 2023/05/09 21:48:27
And from that point on, everything was plug and play. Here is a "soft fitting" of the wing.
And from that point on, everything was plug and play. Here is a "soft fitting" of the wing.
0 2023/05/09 21:47:19
Once the wing was deployed, the project could continue. After removing the wing, I was able to remove the cover plate and then unscrew and remove the actuator assembly ....
Once the wing was deployed, the project could continue. After removing the wing, I was able to remove the cover plate and then unscrew and remove the actuator assembly ....
0 2023/05/09 21:45:45
I ended up cutting an access hole from the hatch interior so that I could get to these wires and apply 12V to the actuator motor, deploying the wing .....
I ended up cutting an access hole from the hatch interior so that I could get to these wires and apply 12V to the actuator motor, deploying the wing .....
0 2023/05/09 21:43:58
The wing needed to be activated into the open position so that the wing mounted screws could be accessed, allowing removal of the wing
The wing needed to be activated into the open position so that the wing mounted screws could be accessed, allowing removal of the wing
0 2023/05/09 21:42:20
Advertisement