Jaguar Forums - Jaguar Enthusiasts Forum
0 2020/07/04 06:51:54
0 2020/07/04 06:56:43
0 2020/07/04 06:57:37
0 2020/07/04 06:58:55
0 2020/07/04 07:06:22
0 2020/07/04 07:07:10
0 2020/07/05 22:40:28
0 2020/07/05 22:41:20
0 2020/07/05 22:42:08
0 2020/07/08 05:09:01
0 2020/07/08 05:09:48
OEM and expanded battery trays
OEM and expanded battery trays
0 2020/07/20 01:31:06
Notch cut to avoid fouling the tank strap bracket. All the same OEM tray fixings are used
Notch cut to avoid fouling the tank strap bracket. All the same OEM tray fixings are used
0 2020/07/20 01:31:55
Wix filter in the feed line from the main tank, obviating the need for the in-sump-tank sock filter
Wix filter in the feed line from the main tank, obviating the need for the in-sump-tank sock filter
0 2020/07/20 01:32:40
Access hole made large enough to get at the drain cock in the sump tank.
Access hole made large enough to get at the drain cock in the sump tank.
0 2020/07/20 01:33:38
All replaced ready for the tank clamp and battery cover to be fitted
All replaced ready for the tank clamp and battery cover to be fitted
0 2020/07/20 01:34:33
0 2020/07/20 08:12:19
0 2020/08/05 23:13:10
0 2020/08/05 23:14:06
0 2020/08/05 23:15:09
0 2020/08/05 23:15:54
0 2020/08/08 09:17:58
0 2020/08/08 09:18:40
0 2020/08/08 09:19:17
0 2020/08/08 09:19:56
0 2020/08/08 09:20:36
0 2020/08/08 09:21:20
0 2020/08/11 09:24:16
0 2020/08/11 09:24:33
0 2020/08/13 00:17:51
0 2020/08/13 00:18:39
0 2020/08/29 23:05:23
0 2020/08/29 23:05:55
0 2020/08/29 23:06:31
All back together
All back together
0 2020/09/07 05:47:05
Camber shims, original on the right
Camber shims, original on the right
0 2020/09/07 05:49:17
Bolt going through the subframe through the spindle, nut on inner end. Note: the cabin end wishbone does not have to be removed to get out the spindle.
Bolt going through the subframe through the spindle, nut on inner end. Note: the cabin end wishbone does not have to be removed to get out the spindle.
0 2020/09/07 05:50:01
Forward end easier to get at.
Forward end easier to get at.
0 2020/09/07 05:50:41
11/16th on nut, ring spanner to hold it against the torque, 5/8ths bolt head.
11/16th on nut, ring spanner to hold it against the torque, 5/8ths bolt head.
0 2020/09/07 05:51:25
Spindle and wishbone inner fulcrum back on, balljoint about to be mounted on outboard end of the wishbones.
Spindle and wishbone inner fulcrum back on, balljoint about to be mounted on outboard end of the wishbones.
0 2020/09/07 05:52:06