Jaguar Forums - Jaguar Enthusiasts Forum
0 2019/10/26 18:09:20
Old vs new bolt
Old vs new bolt
0 2019/10/26 18:09:41
5/16” six point socket might be the trick. Its tight. Any slop and youre done
5/16” six point socket might be the trick. Its tight. Any slop and youre done
0 2019/10/26 18:09:51
0 2019/10/26 18:16:30
0 2019/11/04 16:49:48
0 2019/11/04 16:49:59
0 2019/11/04 16:50:13
0 2019/11/04 16:50:26
0 2019/11/04 21:33:05
0 2019/11/04 21:33:14
0 2019/11/04 21:33:25
0 2019/11/04 21:33:35
0 2019/11/04 21:33:42
0 2019/11/04 21:37:31
0 2019/11/04 21:37:41
You can see the edges are high after a few swipes on the EGR tube
You can see the edges are high after a few swipes on the EGR tube
0 2019/11/08 17:31:34
Other end of egr tube is just as bad
Other end of egr tube is just as bad
0 2019/11/08 17:31:49
After finishing its flat
After finishing its flat
0 2019/11/08 17:32:04
0 2019/11/08 17:32:18
You can see the big lip in this before pic
You can see the big lip in this before pic
0 2019/11/08 17:32:32
The tb elbow lip sticks out below the tb plate. Robs hp!
The tb elbow lip sticks out below the tb plate. Robs hp!
0 2019/11/08 17:32:44
This too got some filing
This too got some filing
0 2019/11/08 17:32:57
Hers the elbow with an old gasket showing how much meat is in the way
Hers the elbow with an old gasket showing how much meat is in the way
0 2019/11/08 17:33:15
Its much better. All matched. Be careful when installing the gaskets and take time to center the gasket on the bolt holes or else the gasket sticks into the opening and the sealing bump on the gasket makes the edge of the gasket kind of flare up and not seal well
Its much better. All matched. Be careful when installing the gaskets and take time to center the gasket on the bolt holes or else the gasket sticks into the opening and the sealing bump on the gasket makes the edge of the gasket kind of flare up and not seal well
0 2019/11/08 17:40:40
Wide open
Wide open
0 2019/11/08 17:41:01
More flattening and slight porting
More flattening and slight porting
0 2019/11/08 17:41:17
These ports look cracked to me. I can see a line down the center divider and in the edges aligned with the bolt holes. Do you see it? I sanded these surfaces on the intake but not the head due to debris
These ports look cracked to me. I can see a line down the center divider and in the edges aligned with the bolt holes. Do you see it? I sanded these surfaces on the intake but not the head due to debris
0 2019/11/08 17:41:28
Looks cracked to me
Looks cracked to me
0 2019/11/08 17:41:38
More crackalacka
More crackalacka
0 2019/11/08 17:41:49
My blower might need repair. I saw some section of smooth shiney vane edge. 😬
My blower might need repair. I saw some section of smooth shiney vane edge. 😬
0 2019/11/08 17:41:59
Think I flattened this. I know I did the other piece
Think I flattened this. I know I did the other piece
0 2019/11/08 17:42:09
Got a new radiator cover. Mine was missing. I had to cut out this section to clear the overflow tank.
Got a new radiator cover. Mine was missing. I had to cut out this section to clear the overflow tank.
0 2019/11/08 17:42:20
Ported elbow with vacuum fitting tapped in place. Ended up changing the fitting to a different style for better clearsnce
Ported elbow with vacuum fitting tapped in place. Ended up changing the fitting to a different style for better clearsnce
0 2019/11/08 17:50:50
Flaking rotor coating. I wish this were all it was
Flaking rotor coating. I wish this were all it was
0 2019/11/08 17:51:10
More. Worst is to come
More. Worst is to come
0 2019/11/08 17:51:22
Not sure how bad this is but ive always been told this should never look like this
Not sure how bad this is but ive always been told this should never look like this
0 2019/11/08 17:51:35
Final rad cover mods
Final rad cover mods
0 2019/11/08 17:51:49
And back together
And back together
0 2019/11/08 17:52:09
0 2019/11/08 18:00:22
0 2019/11/21 10:35:09