Jaguar Forums - Jaguar Enthusiasts Forum
0 2023/01/21 07:55:22
0 2023/01/21 07:57:28
0 2023/01/21 07:59:06
0 2023/01/21 08:04:13
0 2023/01/21 08:05:43
0 2023/01/21 08:06:32
0 2023/01/21 08:07:19
0 2023/01/21 08:08:23
0 2023/01/21 08:09:17
0 2023/01/21 08:10:07
0 2023/01/21 08:13:34
Cleaned the junction box... now just 4 million other things to clean/replace lol
Cleaned the junction box... now just 4 million other things to clean/replace lol
0 2023/01/21 08:30:45
0 2023/01/21 08:31:50
0 2023/01/21 08:32:43
0 2023/01/21 08:33:50
0 2023/01/21 08:34:34
0 2023/01/21 08:35:30
0 2023/01/21 10:09:20
Look at the grey piece close to the bottom screw you will see paint on the "reflector"
Look at the grey piece close to the bottom screw you will see paint on the "reflector"
0 2023/01/30 18:29:16
If you zoom in very close around the lens you will see a slight masking overspray flash.
If you zoom in very close around the lens you will see a slight masking overspray flash.
0 2023/01/30 18:30:11
What the lights looked like on the car! Took a really sunny day and being in the right position to see the handy work.
What the lights looked like on the car! Took a really sunny day and being in the right position to see the handy work.
0 2023/01/30 18:33:42
0 2023/02/13 10:11:45
0 2023/02/13 10:11:50
0 2023/02/13 10:11:53
0 2023/02/22 14:24:28
Surprised they filled out the wheel wells.
Surprised they filled out the wheel wells.
0 2023/02/22 14:25:37
No spacers here!
No spacers here!
0 2023/02/22 14:26:43
0 2023/03/12 18:10:36
0 2023/03/12 18:11:27
0 2023/03/14 17:07:17
0 2023/03/14 17:07:40
The axles are beefy until the spline part, then it steps down some!
The axles are beefy until the spline part, then it steps down some!
0 2023/03/14 17:08:31
0 2023/03/14 17:09:42
You can see the twisting line
You can see the twisting line
0 2023/03/14 17:10:00
More twist!
More twist!
0 2023/03/14 17:10:36
0 2023/03/14 17:10:58
Each box contains 2, one from each side.
Each box contains 2, one from each side.
0 2023/03/26 18:17:43
Some require 2 sets of #11's, but not the case with mine. I needed one box of each
Some require 2 sets of #11's, but not the case with mine. I needed one box of each
0 2023/03/26 18:18:00
The huge #10's required me.to press out the center then hammer and chisel to "fold" the bushing out. I also used an air chisel but be caregul about marring the mating area. If you do use a file or dremel.to dress it smooth.
The huge #10's required me.to press out the center then hammer and chisel to "fold" the bushing out. I also used an air chisel but be caregul about marring the mating area. If you do use a file or dremel.to dress it smooth.
0 2023/03/26 18:18:16
Hardens to 55-65 range. Several videos of using this just google "windo weld for buahings" I used it to fill my cradle and diff bushings for extra stiffness trying to reduce wheel hop.
Hardens to 55-65 range. Several videos of using this just google "windo weld for buahings" I used it to fill my cradle and diff bushings for extra stiffness trying to reduce wheel hop.
0 2023/03/26 18:27:26