Jaguar Forums - Jaguar Enthusiasts Forum
not connected?
not connected?
0 2015/09/03 11:27:19
Here's what I found when I opened up the canister ..black bits
Here's what I found when I opened up the canister ..black bits
0 2015/09/07 14:18:16
This is where the black bits came from
This is where the black bits came from
0 2015/09/07 14:18:32
detail shot of the fried component
detail shot of the fried component
0 2015/09/07 14:18:44
underside of fuel canister lid
underside of fuel canister lid
0 2015/09/08 08:29:32
Cowl of passenger mirror broken at chrome cover clip
Cowl of passenger mirror broken at chrome cover clip
0 2015/09/16 19:23:22
on the right, 91MY. 94 on the left has 2 extra wires and a printed circuit Note exit position of harness from unit - on the 91 the harness exits between the two mount holes
on the right, 91MY. 94 on the left has 2 extra wires and a printed circuit Note exit position of harness from unit - on the 91 the harness exits between the two mount holes
0 2015/09/16 19:34:53
0 2015/09/16 19:35:05
The components that make up the mirror internals
The components that make up the mirror internals
0 2015/09/16 19:35:20
0 2015/09/16 19:35:31
The 91 mirror mount - note orientation of the three mounting screws
The 91 mirror mount - note orientation of the three mounting screws
0 2015/09/16 19:35:43
0 2015/09/16 19:35:56
Springs re-attached to bracket prior to motor installation
Springs re-attached to bracket prior to motor installation
0 2015/09/16 19:36:49
Finished
Finished
0 2015/09/16 19:38:12
Corner of bumper with chrome finisher pushed back - obviously took a hit a one time.
Corner of bumper with chrome finisher pushed back - obviously took a hit a one time.
0 2015/09/18 21:44:01
Bumper damage - both passenger side section and front rubber torn.
Bumper damage - both passenger side section and front rubber torn.
0 2015/09/18 21:44:06
The front bumper from Jim's 91 was in excellent condition
The front bumper from Jim's 91 was in excellent condition
0 2015/09/18 21:51:10
Passenger side section after removing marker lamp. Section is secured to the main beam by two bolts. Chrome finisher also attached with same bolts.
Passenger side section after removing marker lamp. Section is secured to the main beam by two bolts. Chrome finisher also attached with same bolts.
0 2015/09/18 21:53:28
Bolt head is 7mm, Nut is 8mm!
Bolt head is 7mm, Nut is 8mm!
0 2015/09/18 21:53:33
Rubber section (top view) Rubber component is screwed and clipped to the main bumper beam
Rubber section (top view) Rubber component is screwed and clipped to the main bumper beam
0 2015/09/18 21:53:43
Front rubber section is secured to main beam by several clips on the underside
Front rubber section is secured to main beam by several clips on the underside
0 2015/09/18 21:53:52
The various components of the bumper. This bumper had 2 washer jets, as does the 94.
The various components of the bumper. This bumper had 2 washer jets, as does the 94.
0 2015/09/18 21:54:19
Bumper beam is secured to the energy absorbing struts on the car by two 19mm bolts
Bumper beam is secured to the energy absorbing struts on the car by two 19mm bolts
0 2015/09/23 22:37:14
With bolts removed, bumper can be slid forward and plastic finisher eased up and off
With bolts removed, bumper can be slid forward and plastic finisher eased up and off
0 2015/09/23 22:37:47
slight differences in the finishers - top: 94MY VDP profile, bottom 92MY Base XJ40
slight differences in the finishers - top: 94MY VDP profile, bottom 92MY Base XJ40
0 2015/09/23 22:37:59
The damaged front bumper rubber, left corner torn. Lights unplugged and set aside.
The damaged front bumper rubber, left corner torn. Lights unplugged and set aside.
0 2015/09/23 22:54:39
The damaged corner of the front rubber section
The damaged corner of the front rubber section
0 2015/09/23 22:57:16
PO's pass side rubber repair included substituting sheet metal screws for the OEM bolts
PO's pass side rubber repair included substituting sheet metal screws for the OEM bolts
0 2015/09/23 22:58:31
top chrome section is secured by 6 philips head screws that locate with nylon inserts in the beam
top chrome section is secured by 6 philips head screws that locate with nylon inserts in the beam
0 2015/09/23 23:21:27
The clips that hold the upper edge of the rubber to the beam.
The clips that hold the upper edge of the rubber to the beam.
0 2015/09/23 23:35:25
clips securing front rubber section, underside
clips securing front rubber section, underside
0 2015/09/23 23:43:40
replacement front rubber fitted
replacement front rubber fitted
0 2015/09/23 23:52:37
Top chrome section and washer jets reassembled to the beam
Top chrome section and washer jets reassembled to the beam
0 2015/09/24 00:01:42
beam reassembled with new rubber and ready to fit to car
beam reassembled with new rubber and ready to fit to car
0 2015/09/24 00:18:19
Driver's side reassembled
Driver's side reassembled
0 2015/09/24 00:24:51
Passenger side reassembled
Passenger side reassembled
0 2015/09/24 00:24:55
0 2015/09/24 01:27:42
Painted and ready to install
Painted and ready to install
0 2015/09/30 18:04:52
0 2015/09/30 18:04:56
0 2015/09/30 18:04:57