Jaguar Forums - Jaguar Enthusiasts Forum
They are different for sure. One left and one right.
They are different for sure. One left and one right.
0 2016/03/17 17:56:36
Bolt gasket for outside of cam cover
Bolt gasket for outside of cam cover
0 2016/03/17 17:56:42
0 2016/03/17 17:56:43
A another view of one. I did notice that the stamps on side are missing as shown online on some sites
A another view of one. I did notice that the stamps on side are missing as shown online on some sites
0 2016/03/17 17:56:45
Other end.
Other end.
0 2016/03/17 17:56:46
0 2016/03/17 18:25:05
cover and spark plug/center bolt combo SNG best price I could find
cover and spark plug/center bolt combo SNG best price I could find
0 2016/03/17 18:27:30
two panel fasteners broken on arrow, and the top edge vinyl glue point broken need hot glue or something.
two panel fasteners broken on arrow, and the top edge vinyl glue point broken need hot glue or something.
0 2016/03/23 18:54:33
0 2016/03/26 08:21:42
New threads glued into place with JB weld
New threads glued into place with JB weld
0 2016/03/26 08:22:36
Found at lowes, had to remove about 3/4 of outer thread to get to fit. 10-32 internal screw.
Found at lowes, had to remove about 3/4 of outer thread to get to fit. 10-32 internal screw.
0 2016/03/26 08:22:38
two large silver spots are my first solder
two large silver spots are my first solder
0 2016/03/27 18:38:59
black wire exiting under the connector is added, soldered second pin in from corner between the plastic connector and circuit board then to junction on board
black wire exiting under the connector is added, soldered second pin in from corner between the plastic connector and circuit board then to junction on board
0 2016/03/27 18:39:01
Here is what it looked like finished
Here is what it looked like finished
0 2016/03/29 18:12:16
started with a simple outline, used a tapered drill to cut the hole then cut the two angled notches, then outside the line to an approximate edge to fold for the replacement I needed
started with a simple outline, used a tapered drill to cut the hole then cut the two angled notches, then outside the line to an approximate edge to fold for the replacement I needed
0 2016/03/29 18:12:17
Heat gun and pliers to bend, this type of plastic has a low heat point and very easy to shape, yet extremely ridged
Heat gun and pliers to bend, this type of plastic has a low heat point and very easy to shape, yet extremely ridged
0 2016/03/29 18:12:18
completed piece ready to glue
completed piece ready to glue
0 2016/03/31 19:30:32
Used heat gun to warm it up then bent and cooled against larger metal
Used heat gun to warm it up then bent and cooled against larger metal
0 2016/03/31 19:30:34
cut out pattern from computer monitor cable cover piece
cut out pattern from computer monitor cable cover piece
0 2016/03/31 19:30:35
Here is what it looked like when I picked it up on the trailer.
Here is what it looked like when I picked it up on the trailer.
0 2016/04/10 14:16:35
Cloudy day the dark is a dark cloud above and the right side is my house reflecting. A few imperfections but no longer embarrassing. A good 10 footer.
Cloudy day the dark is a dark cloud above and the right side is my house reflecting. A few imperfections but no longer embarrassing. A good 10 footer.
0 2016/04/10 14:16:52
Here is the fender right about the area from elbow to elbow looked just like the trunk.
Here is the fender right about the area from elbow to elbow looked just like the trunk.
0 2016/04/10 14:17:18
color of oil
color of oil
0 2016/04/10 15:06:41
pretty clean used part arrived from a 98 donor car
pretty clean used part arrived from a 98 donor car
0 2017/02/03 13:41:11
Repaired hinge.
Repaired hinge.
0 2017/02/16 06:48:22
Before- Broken hinge after disassembled.
Before- Broken hinge after disassembled.
0 2017/02/16 06:49:39
0 2017/02/18 13:57:29
The edge of speaker can be seen
The edge of speaker can be seen
0 2017/03/06 16:11:46
0 2017/03/06 16:14:46
Red trace wire is on the positive terminal.
Red trace wire is on the positive terminal.
0 2017/03/06 16:16:25
0 2017/03/06 16:46:16
0 2017/03/06 16:46:18
0 2017/03/12 09:23:45
0 2017/03/12 09:27:13
0 2017/03/12 09:36:42
small screw driver or similar tool under an edge and grab with fingers or gently with needle nose pliers.
small screw driver or similar tool under an edge and grab with fingers or gently with needle nose pliers.
0 2017/03/18 16:51:43
Hole is just beyond the point of insert
Hole is just beyond the point of insert
0 2017/03/18 16:58:19
press here to release the connector
press here to release the connector
0 2017/03/18 17:04:33
pull both tabs up and slide off the cover
pull both tabs up and slide off the cover
0 2017/03/18 17:05:46
Red goes under yellow
Red goes under yellow
0 2017/03/18 17:07:29