Jaguar Forums - Jaguar Enthusiasts Forum
  • LOG IN
  • REGISTER
  • Forums
    • General Jaguar Forums
      • New Member Area - Intro a MUST
      • Jaguar Forums Feedback & Suggestion Center
      • General Tech Help
    • Jaguar Models ( Current )
      • XF (X260)
      • F-Type ( X152 )
      • XE ( X760 )
      • E-Pace
      • F-Pace (X761) / C-X17
      • I-Pace EV
    • Jaguar Models ( Modern )
      • XF and XFR ( X250 )
      • XJ ( X351 )
      • X-Type ( X400 )
      • S-Type / S type R Supercharged V8 ( X200 )
      • XJ XJ6 / XJ8 / XJR ( X350 & X358 )
      • XJ XJ8 / XJR ( X308 )
      • XJ XJ12 ( X305 )
      • XJ XJ6 / XJR6 ( X300 )
      • XK8 / XKR ( X100 )
      • XK / XKR ( X150 )
    • Jaguar Models ( Classics )
      • Mark V - X 420G
      • MKI / MKII S type 240 340 & Daimler
      • XK120 XK140 XK150
      • E type ( XK-E )
      • XJ6 & XJ12 Series I, II & III
      • XJS ( X27 )
      • XJ40 ( XJ81 )
      • XKSS
      • XJ220
    • Other Jaguars
      • Other Jaguar Models / Concepts / Replicas
    • Diesel variants
      • Diesel variants - All models
    • Non Jaguar vehicles
      • Non-Jaguar Vehicles
    • Brand Review
      • Jaguar Press release
      • Jaguar Customer Relationship Centre
      • Jaguar Engines & transmissions
      • Wheels / Tires, Suspension & handling
      • Interior
      • Exterior
      • Audio/Visual Electronics
      • Detailing / Car care
      • Motorsports
    • Jaguar Classifieds
      • Marketplace
      • PRIVATE For Sale / Trade or Buy Classifieds
      • VENDOR 'For Sale' Classifieds
    • Regional
      • US Northeast
      • US Central
      • US Southwest
      • US Western
      • US Northwest
      • US Midwest
      • US Mid Atlantic
      • US Lower Atlantic
      • US Southern Midwest
      • Canada
      • Mexico, South America
      • UK & Eire
      • Europe
      • Australia - Queensland
      • Australia - New South Wales / ACT
      • Australia - Victoria / Tasmania
      • Australia - Western
      • Australia - South / NT
      • New Zealand
      • Other Areas
    • Official Site Sponsors
      • VENDOR Threads
    • General Interest / History
      • Sights N Sounds
      • Photography
      • Forum announcement archives / Forum History
      • Jaguarforums Merchandise
      • Memorial Section
  • News
  • Marketplace
    • Vendor Directory
    • Become a Vendor
    • Member Marketplace
    • Vendor Marketplace
    • Site Store
  • New Posts
  • Tools
    • Car Payment Calculator
    • Tire Rim Calculator
    • Vin Decoder
    • Recalls
    • Technical Service Bulletins (TSBs)
    • Members List
    • Live Feed
  • Gallery
  • View Dark Mode
    • Please register or login to enable Dark Mode.
  • Log In
  • Register
Jaguar Forums - Jaguar Enthusiasts Forum
    • Threads
      • Advanced
Dark Mode

Please register or login to enable Dark Mode.

Log In

Forgot your Password?

By logging into your account, you agree to our Terms of Use and Privacy Policy, and to the use of cookies as described therein.
or
 
  • Recent
  • Commented
  • Albums
  • My Pictures

My Post Pictures

orangeblossom
May 12, 2016
 2225
 0
Sort:
Default
  • Default
  • Most Recent
How does the Fan Clutch work?
How does the Fan Clutch work?
0 2016/07/06 09:03:46 orangeblos
0 2016/07/06 11:21:51 orangeblos
0 2016/07/12 05:59:02 orangeblos
0 2016/07/12 06:00:21 orangeblos
0 2016/07/24 16:19:36 orangeblos
0 2016/07/24 16:20:18 orangeblos
The Fans arrive but will they fit the Car?
The Fans arrive but will they fit the Car?
0 2016/08/01 13:42:56 orangeblos
Looking Good but how the hell do I fit them?
Looking Good but how the hell do I fit them?
0 2016/08/01 13:45:15 orangeblos
At least they fit on the Rad so that's a good start
I'm trial fitting these on an old Rad and doing a Trial set up by fitting them in my Scrap Car.
At least they fit on the Rad so that's a good start I'm trial fitting these on an old Rad and doing a Trial set up by fitting them in my Scrap Car.
0 2016/08/01 13:47:19 orangeblos
I've made a very simple Frame out of some Scrap Steel, with a couple of Angle Brackets to hang from the lugs that are on top of the Rad.

The Tubular 'thingy' underneath is an extra support I 'Migged' up to help support the Fans and the Clamps that are sticking out of them

Were the Clamps from the Battery Holder of my Scrap XJS.

These Clamps will hook over the Beam that is underneath the Radiator and pull the Fans onto the Matrix.

As they need to be as Close to this as possible.
I've made a very simple Frame out of some Scrap Steel, with a couple of Angle Brackets to hang from the lugs that are on top of the Rad. The Tubular 'thingy' underneath is an extra support I 'Migged' up to help support the Fans and the Clamps that are sticking out of them Were the Clamps from the Battery Holder of my Scrap XJS. These Clamps will hook over the Beam that is underneath the Radiator and pull the Fans onto the Matrix. As they need to be as Close to this as possible.
0 2016/08/01 13:52:23 orangeblos
The Fans are now on position, with the Brackets hooked over the lugs on the top of the Rad.
The Fans are now on position, with the Brackets hooked over the lugs on the top of the Rad.
0 2016/08/01 14:06:41 orangeblos
The Brackets are then sandwiched between the Rad and the Closing Panel.

Also note the Tubular support strut, which was pushed on to Two Plastic lugs that were already moulded unto Fan Shroud.
The Brackets are then sandwiched between the Rad and the Closing Panel. Also note the Tubular support strut, which was pushed on to Two Plastic lugs that were already moulded unto Fan Shroud.
0 2016/08/01 14:09:15 orangeblos
The Fan now in position Trial fitted onto my Scrap Car and Scrap Rad.
The Fan now in position Trial fitted onto my Scrap Car and Scrap Rad.
0 2016/08/01 14:15:34 orangeblos
Closing Panel Trial Fitted on Top of the Rad
Closing Panel Trial Fitted on Top of the Rad
0 2016/08/01 14:17:41 orangeblos
The Fans are now fitted with the Closing Panel on Top.

The Brackets that are holding the Rad are Sandwiched between the Rad and the Closing Panel.
The Fans are now fitted with the Closing Panel on Top. The Brackets that are holding the Rad are Sandwiched between the Rad and the Closing Panel.
0 2016/08/01 14:19:14 orangeblos
These Clips 'Ex Battery Clamps' go through holes drilled in the legs of the Tubular Support Struts and the Clip over the Beam under the Rad.

Where they can be adjusted to pull the Fans close to the Matrix.
These Clips 'Ex Battery Clamps' go through holes drilled in the legs of the Tubular Support Struts and the Clip over the Beam under the Rad. Where they can be adjusted to pull the Fans close to the Matrix.
0 2016/08/01 14:22:57 orangeblos
The Unit Removed from the 'Scrap Car' already for Testing.
The Unit Removed from the 'Scrap Car' already for Testing.
0 2016/08/01 14:27:59 orangeblos
0 2016/08/03 11:37:41 orangeblos
0 2016/08/03 11:45:13 orangeblos
0 2016/08/03 15:42:14 orangeblos
Marelli Ignition Module
Do I need any special conductive compound to fit them (There are two of these on the Car)
Marelli Ignition Module Do I need any special conductive compound to fit them (There are two of these on the Car)
0 2016/08/11 10:32:53 orangeblos
0 2016/08/12 03:31:35 orangeblos
0 2016/08/21 06:23:03 orangeblos
0 2016/08/21 16:00:36 orangeblos
0 2016/09/04 07:55:59 orangeblos
0 2016/09/06 16:24:38 orangeblos
0 2016/09/06 16:25:08 orangeblos
0 2016/09/07 06:02:23 orangeblos
0 2016/09/07 15:38:51 orangeblos
0 2016/09/07 15:39:20 orangeblos
0 2016/09/12 13:56:07 orangeblos
0 2016/09/16 16:01:17 orangeblos
0 2016/09/17 22:07:21 orangeblos
0 2016/09/18 15:01:06 orangeblos
0 2016/09/18 16:36:24 orangeblos
0 2016/09/18 16:37:49 orangeblos
0 2016/09/18 16:38:21 orangeblos
0 2016/09/18 16:38:56 orangeblos
0 2016/09/18 16:39:28 orangeblos
0 2016/09/20 04:01:09 orangeblos
First
Page
2 of 56
Last
Go To
Page
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • ...
  • 56
2 of 56
Go To GO
Go to page of 56 pages
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • ...
  • 56

Top
Jaguar Forums - Jaguar Enthusiasts Forum
  • Contact Us
  • FAQ
  • Archive
  • Advertising
  • Cookie Policy
  • Privacy Statement
  • Terms of Service
  • Your Privacy Choices
  • Manage Preferences

© 2026 MH Sub I, LLC dba Internet Brands

Follow Us        



When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.