Jaguar Forums - Jaguar Enthusiasts Forum
0 2026/01/02 10:15:23
0 2025/08/27 19:51:41
0 2025/08/27 19:51:39
0 2025/08/27 19:51:37
0 2025/08/27 19:51:34
0 2025/08/27 19:51:32
0 2025/08/27 19:51:29
There wash a spring clamp, it’s just not on in this pic
There wash a spring clamp, it’s just not on in this pic
0 2025/08/27 19:51:26
0 2025/08/27 19:51:24
0 2025/08/27 19:51:22
0 2025/08/27 19:51:18
0 2025/08/27 19:51:16
Untucked. blew it out and no signs of blockage or dirt.
Untucked. blew it out and no signs of blockage or dirt.
0 2025/08/17 19:08:12
Here's where it was tucked behind the tunnel heat shield
Here's where it was tucked behind the tunnel heat shield
0 2025/08/17 19:08:09
Hard to see but seems to be attached fine and no obvious signs of trouble
Hard to see but seems to be attached fine and no obvious signs of trouble
0 2025/08/17 19:08:07
eBay pic of the outside
eBay pic of the outside
0 2025/08/17 19:08:06
Indoors face the seal
Indoors face the seal
0 2025/08/17 19:08:00
Outdoors face ion the seal
Outdoors face ion the seal
0 2025/08/17 19:07:58
Highlighted where it's leaking
Highlighted where it's leaking
0 2025/08/17 19:07:57
Tried butyl headlight sealant caulk and it didn't seem to help much
Tried butyl headlight sealant caulk and it didn't seem to help much
0 2025/08/17 19:07:53
0 2025/08/17 19:07:50
Here's the leak. it leaks on both sides
Here's the leak. it leaks on both sides
0 2025/08/17 19:07:47
This is 1 connected pair of side bolster heaters, The optional bolster kit contains 2 of these so enough to do upper and lower bolster on 1 seat. I think the measurements will just fit (roughly 3.5" x13") He said they did a lot of measuring side bolsters on many cars other than try to get a good size to fit most since you can't cut the elements.
This is 1 connected pair of side bolster heaters, The optional bolster kit contains 2 of these so enough to do upper and lower bolster on 1 seat. I think the measurements will just fit (roughly 3.5" x13") He said they did a lot of measuring side bolsters on many cars other than try to get a good size to fit most since you can't cut the elements.
0 2025/01/24 17:25:15
0 2025/01/24 15:24:01
You can take of the button cover carefully off from the front and swap Trac to ASC
You can take of the button cover carefully off from the front and swap Trac to ASC
0 2025/01/24 15:17:21
0 2025/01/24 15:17:17
The upper connector. I aapently don't have a pic of the lower one
The upper connector. I aapently don't have a pic of the lower one
0 2025/01/24 15:17:13
0 2025/01/24 15:17:10
0 2025/01/24 15:17:08
I think the Lear seats did not have lower side bolster heating originally
I think the Lear seats did not have lower side bolster heating originally
0 2025/01/24 15:17:06
0 2025/01/24 15:17:02
But I think the newer separate headrest seats did hav heated lower bolsters,
But I think the newer separate headrest seats did hav heated lower bolsters,
0 2025/01/24 15:16:59
one of the 2-part main elements. The kit comes 2 of these, enough for 1 seat.
one of the 2-part main elements. The kit comes 2 of these, enough for 1 seat.
0 2025/01/24 15:16:57
0 2025/01/24 15:16:56
side bolster heaters. I think the measurements will fit
side bolster heaters. I think the measurements will fit
0 2025/01/24 15:16:53
Apparently, I didn’t take pictures, but from what I recall, I think I did my best to come up with a paper template for these ovals, and I believe that they will barely fit and the lower side bolsters and the upper side bolsters of the early Lear high back seats. But don’t take my word for it
Apparently, I didn’t take pictures, but from what I recall, I think I did my best to come up with a paper template for these ovals, and I believe that they will barely fit and the lower side bolsters and the upper side bolsters of the early Lear high back seats. But don’t take my word for it
0 2025/01/24 07:13:10
0 2025/01/24 07:13:08
0 2025/01/24 07:13:06
This is what the button covers look like I think you can carefully pry them off with a little curved pic without taking the switch pack apart. Whereas the white inner buttonYou have to take a pack apart and take it out from the back
This is what the button covers look like I think you can carefully pry them off with a little curved pic without taking the switch pack apart. Whereas the white inner buttonYou have to take a pack apart and take it out from the back
0 2025/01/24 07:13:03
This is the factory wiring plug
This is the factory wiring plug
0 2025/01/24 07:13:00