Jaguar Forums - Jaguar Enthusiasts Forum
Oetiker clamp on the injector, stainless fuel pipe clamp on the rail spigot
Oetiker clamp on the injector, stainless fuel pipe clamp on the rail spigot
0 2025/01/22 07:40:39
Front two injectors fitted after the back five each side have been fitted
Front two injectors fitted after the back five each side have been fitted
0 2025/01/22 07:40:36
Offering up the rail
Offering up the rail
0 2025/01/22 07:40:31
0 2025/01/16 05:17:30
0 2025/01/16 05:15:03
0 2025/01/16 05:05:16
It would need about an inch welded in a shown in blue
It would need about an inch welded in a shown in blue
0 2025/01/15 12:54:21
0 2025/01/15 07:40:19
0 2025/01/15 07:40:16
Shows the distinct outward splay of the injectors. The hole in the manifold is also angled to accept this angled insertion.
Shows the distinct outward splay of the injectors. The hole in the manifold is also angled to accept this angled insertion.
0 2025/01/15 07:40:11
It turns out shorter hoses are a BAD idea!
It turns out shorter hoses are a BAD idea!
0 2025/01/15 01:08:16
0 2025/01/12 09:37:25
0 2025/01/12 09:36:15
0 2025/01/12 09:33:35
0 2025/01/12 09:18:18
0 2025/01/12 09:13:44
0 2025/01/12 09:11:51
Close up shots.
Close up shots.
0 2025/01/12 08:45:43
Blue rinf shows the pump output connectioins to the oil galleries. Red ring shows (round connection circled) the oil cooler return feed to the pump and (pipe circled) the pipe from the sump pickup joining the casting. The TWO input to the oil pump.
Blue rinf shows the pump output connectioins to the oil galleries. Red ring shows (round connection circled) the oil cooler return feed to the pump and (pipe circled) the pipe from the sump pickup joining the casting. The TWO input to the oil pump.
0 2025/01/12 08:45:38
0 2025/01/11 07:07:40
0 2025/01/11 07:07:37
0 2025/01/11 07:07:34
0 2025/01/11 07:07:31
0 2025/01/11 07:07:28
0 2025/01/11 07:04:50
0 2025/01/11 01:51:41
Madame's mother is a great help on these occasions and here she is holding up the wrapped and completed loom she helped me finish today. Adhesive loom wrap works really well and makes a decent looking end product.
Madame's mother is a great help on these occasions and here she is holding up the wrapped and completed loom she helped me finish today. Adhesive loom wrap works really well and makes a decent looking end product.
0 2025/01/06 07:50:29
0 2025/01/06 07:50:26
0 2025/01/06 07:50:22
Finished splices prior to their being wrapped individually with silicone self amalgamating tape.
Finished splices prior to their being wrapped individually with silicone self amalgamating tape.
0 2025/01/06 07:50:19
Partially completed splices
Partially completed splices
0 2025/01/06 07:50:16
New loom solder tubed to plug pigtail. The free ends were loaded with the outer shrink tube and the solder tube, then the wires twisted together and the tube slid up.
New loom solder tubed to plug pigtail. The free ends were loaded with the outer shrink tube and the solder tube, then the wires twisted together and the tube slid up.
0 2025/01/06 07:50:11
0 2025/01/05 01:07:13
0 2024/12/24 23:07:37
0 2024/12/24 03:36:47
Welded
Welded
0 2024/12/23 00:28:03
Ready to weld
Ready to weld
0 2024/12/23 00:27:44
failed end piece
failed end piece
0 2024/12/23 00:27:20
0 2024/12/23 00:26:33
Aftermarket bush after 3 months
Aftermarket bush after 3 months
0 2024/12/23 00:26:15