Jaguar Forums - Jaguar Enthusiasts Forum
0 2024/06/24 01:43:40
0 2024/06/24 01:43:34
0 2024/06/24 01:43:29
0 2024/06/14 21:39:37
0 2024/06/14 21:39:32
0 2024/06/14 21:39:27
0 2024/06/14 21:39:22
0 2024/06/14 21:39:16
Proud team with No 1 sone
Proud team with No 1 sone
0 2024/06/14 10:17:39
In the ajoining barn, me and nephew removing engine
In the ajoining barn, me and nephew removing engine
0 2024/06/14 10:17:29
The ajoining barn entrace gap is on the right.
The ajoining barn entrace gap is on the right.
0 2024/06/14 10:13:41
A pic of our ancient farmhouse.
A pic of our ancient farmhouse.
0 2024/06/14 06:22:38
Gilly on a picnic
Gilly on a picnic
0 2024/06/14 06:20:54
We planted all these trees 20 years ago.
We planted all these trees 20 years ago.
0 2024/06/14 06:17:11
0 2024/05/03 07:13:26
Just as long as George s forearm!!
Just as long as George s forearm!!
0 2024/04/23 05:42:49
capstan closed.
capstan closed.
0 2024/04/16 03:17:57
Capstan one third open
Capstan one third open
0 2024/04/16 03:17:52
Lever when throttle one third open. My finger is where the unit cable will go. At this point the unit will have maximum 90° leverage, as the unit cable will be parallel to the pedal cable.
Lever when throttle one third open. My finger is where the unit cable will go. At this point the unit will have maximum 90° leverage, as the unit cable will be parallel to the pedal cable.
0 2024/04/16 03:17:47
Lever when throttle closed.
Lever when throttle closed.
0 2024/04/16 03:17:42
The steel ponter is on the hub tube and the blue line shows the inner hub bearing inner race.
The steel ponter is on the hub tube and the blue line shows the inner hub bearing inner race.
0 2024/04/14 11:17:45
This is not the side I am using, but the cavity on the RHS is still perfect.
This is not the side I am using, but the cavity on the RHS is still perfect.
0 2024/04/08 06:01:05
0 2024/04/07 07:55:55
0 2024/04/04 22:55:22
Ringed in blue
Ringed in blue
0 2024/04/04 08:35:09
Accelerator pedal at closed position. The nylon bush that pushes the pedal down if the CC is activated is seen at the top left, and acts on the pedal extension
Accelerator pedal at closed position. The nylon bush that pushes the pedal down if the CC is activated is seen at the top left, and acts on the pedal extension
0 2024/04/04 02:56:59
Close up of stud that the CC cable is attached to, held by a washer and a split pin. The hole for the pin is clear in the next photo
Close up of stud that the CC cable is attached to, held by a washer and a split pin. The hole for the pin is clear in the next photo
0 2024/04/04 02:56:36
Accelerator pedal in the WOT position as if the CC cable was activating it. The CC cable pulls in the arrowed direction, thus the other end of the pivot with the nylon bush pushes the pedal and thus opens the throttles as if the driver was doing so.
Accelerator pedal in the WOT position as if the CC cable was activating it. The CC cable pulls in the arrowed direction, thus the other end of the pivot with the nylon bush pushes the pedal and thus opens the throttles as if the driver was doing so.
0 2024/04/04 02:56:32
Close up of the CC pivot arm
Close up of the CC pivot arm
0 2024/04/04 02:56:21
0 2024/04/02 04:37:30
0 2024/03/29 06:44:53
0 2024/03/29 06:44:47
Original HT map kept and used for sentimental reasons.
Original HT map kept and used for sentimental reasons.
0 2024/03/29 06:42:57
0 2024/03/29 06:41:52
0 2024/03/29 06:34:34
pushing the circlip fully home so it clicks into the groove in the column
pushing the circlip fully home so it clicks into the groove in the column
0 2024/03/29 06:31:07
0 2024/03/29 06:26:57
Once in place, press fully home with a screwdriver to lock the starwheel to the column
Once in place, press fully home with a screwdriver to lock the starwheel to the column
0 2024/03/29 06:26:52
U clip in pliers ready to be replaced
U clip in pliers ready to be replaced
0 2024/03/29 06:26:46
The arm of the pickup marked in red is articulated and must be placed in position before the fixing screw is replaced
The arm of the pickup marked in red is articulated and must be placed in position before the fixing screw is replaced
0 2024/03/29 06:21:48