Jaguar Forums - Jaguar Enthusiasts Forum
0 2023/08/19 23:33:22
0 2023/08/10 10:49:30
0 2023/08/10 10:48:50
0 2023/07/13 01:33:07
0 2023/07/13 01:32:31
0 2023/07/13 01:31:54
0 2023/07/13 01:31:19
0 2023/07/13 01:30:47
0 2023/07/13 01:28:51
0 2023/07/13 01:28:14
0 2023/07/13 01:27:37
My friend Michel's son Frederique models the method
My friend Michel's son Frederique models the method
0 2023/07/12 01:17:23
0 2023/07/07 09:47:17
0 2023/06/19 06:15:59
0 2023/06/19 06:15:30
0 2023/06/19 06:15:06
0 2023/06/19 06:14:37
0 2023/06/19 06:14:12
0 2023/06/19 06:13:31
This photo show the collision bracket with the flange that bolts to the trans pan still there
This photo show the collision bracket with the flange that bolts to the trans pan still there
0 2023/06/17 08:55:09
This photo show the collision bracket with the flange that bolts to the trans pan removed
This photo show the collision bracket with the flange that bolts to the trans pan removed
0 2023/06/17 08:55:03
0 2023/05/22 22:41:25
0 2023/05/21 10:10:53
0 2023/05/18 08:03:00
0 2023/05/14 00:57:04
0 2023/05/14 00:56:35
0 2023/05/12 12:14:02
0 2023/05/01 10:30:54
Blue box shows the self amalgamating tape wrapping the TPS/silicone joins. The red line shows the GiF patented two-capstan method of testing the system! The new Variohm TPS is connected to the loom, the throttle capstan is connected to the throttles but not the loom.
Blue box shows the self amalgamating tape wrapping the TPS/silicone joins. The red line shows the GiF patented two-capstan method of testing the system! The new Variohm TPS is connected to the loom, the throttle capstan is connected to the throttles but not the loom.
0 2023/03/22 11:22:23
This shot illustrates the Bournes/Varihm colours to be joined, as set out in the attachment to Post 10 above. NOTE the OEM Red TPS pigtail colours are NOT the same as the Bournes colours. Post 10 shows the correct connections to the OEM Loom plug for Variohm, OEM Bournes and OEM red TPSs.
This shot illustrates the Bournes/Varihm colours to be joined, as set out in the attachment to Post 10 above. NOTE the OEM Red TPS pigtail colours are NOT the same as the Bournes colours. Post 10 shows the correct connections to the OEM Loom plug for Variohm, OEM Bournes and OEM red TPSs.
0 2023/03/22 11:10:33
0 2023/03/22 11:10:02
0 2023/03/22 11:09:33
The solder tube ready to be heat shrunk
The solder tube ready to be heat shrunk
0 2023/03/22 11:09:02
This shows the silicone and the variohm pigtails ready to be twisted together and then solidly attached using the tubes shown in the previous photo
This shows the silicone and the variohm pigtails ready to be twisted together and then solidly attached using the tubes shown in the previous photo
0 2023/03/22 11:08:29
Close up of the silicone wires loaded with the solder shrink tube and the two heat shrink outers.
Close up of the silicone wires loaded with the solder shrink tube and the two heat shrink outers.
0 2023/03/22 11:07:57
This pic shows the smaller diameter silsicone wires the Bournes pigtails ate connected to
This pic shows the smaller diameter silsicone wires the Bournes pigtails ate connected to
0 2023/03/22 11:07:20
Bournes plug pigtails connected
Bournes plug pigtails connected
0 2023/03/22 11:06:43
0 2023/03/22 10:39:03
You can just see the washer under the wing slot
You can just see the washer under the wing slot
0 2023/03/22 10:36:59
0 2023/03/20 08:48:49