Jaguar Forums - Jaguar Enthusiasts Forum
0 2020/09/19 19:24:30
0 2020/07/24 06:34:33
See gold valve.
See gold valve.
0 2020/03/16 12:28:32
General location for orientation.
General location for orientation.
0 2020/03/16 12:27:26
Here you go...
Here you go...
0 2019/10/18 15:45:34
0 2019/10/18 15:08:26
0 2019/10/18 15:02:29
Measuring the od of the protrusion
Measuring the od of the protrusion
0 2019/09/12 07:42:02
Shows the wrapped Skewer in place before gluing.
Shows the wrapped Skewer in place before gluing.
0 2019/09/12 07:39:28
0 2019/09/12 07:32:45
Bamboo Skewer from kitchen cut to 14.5mm long fits side to dide
Bamboo Skewer from kitchen cut to 14.5mm long fits side to dide
0 2019/09/08 20:49:53
Diameter 4.5mm
Diameter 4.5mm
0 2019/09/08 20:49:12
See protrusions each side.
See protrusions each side.
0 2019/09/08 20:48:16
0 2019/09/08 20:24:40
0 2019/09/08 20:21:43
Points of rotation. Heres where protrusion enters armrest female "cup"
Points of rotation. Heres where protrusion enters armrest female "cup"
0 2019/09/08 20:19:08
Measuring the protrusion
Measuring the protrusion
0 2019/09/08 20:18:13
0 2019/07/07 06:29:28
0 2019/07/07 06:29:17
0 2019/05/26 11:41:22
Amazon ad
Amazon ad
0 2019/05/26 11:32:53
Driver door this type bolt.
Driver door this type bolt.
0 2019/03/07 13:36:42
This one mounts at door plane level. Must cut upper disks off
This one mounts at door plane level. Must cut upper disks off
0 2019/01/15 20:53:27
Note fastener mounts well below door plane.
Note fastener mounts well below door plane.
0 2019/01/15 20:52:37
Aee the 3 levels of mounting disks discussed
Aee the 3 levels of mounting disks discussed
0 2019/01/15 20:50:57
NAPA brand $4.50 for #10 fastenera
NAPA brand $4.50 for #10 fastenera
0 2019/01/15 20:49:33
Pickle fork from mechanic.
Pickle fork from mechanic.
0 2018/10/16 06:57:47
1st time i thpught kf trying
1st time i thpught kf trying
0 2018/10/05 12:05:26
Zoom in on alpine unit
Zoom in on alpine unit
0 2018/09/10 23:32:54
0 2018/08/28 09:19:09
Picture of screw size and type
Picture of screw size and type
0 2018/08/28 08:57:48
Rod in place, ready to torque down
Rod in place, ready to torque down
0 2018/08/28 08:56:21
Here is where the threaded rod goes
Here is where the threaded rod goes
0 2018/08/28 08:55:22
Turning screw into threaded rod.
Turning screw into threaded rod.
0 2018/08/28 08:54:24
Upper cowl's holes.
Upper cowl's holes.
0 2018/08/28 08:53:13
Non threaded holes for upper cowl shroud
Non threaded holes for upper cowl shroud
0 2018/08/27 13:30:58
Saved some headaches with this simple idea.
Saved some headaches with this simple idea.
0 2018/06/30 21:23:27
See black ring around this rear view. Is the black metal part permanent or press it out?
See black ring around this rear view. Is the black metal part permanent or press it out?
0 2018/02/26 05:55:28
See silver lip at back
See silver lip at back
0 2018/02/26 05:55:20
Check this hose.
Check this hose.
0 2018/01/05 21:10:50