Jaguar Forums - Jaguar Enthusiasts Forum
0 2025/07/09 16:05:53
0 2025/07/09 16:05:30
A dream.of mine!
A dream.of mine!
0 2024/01/02 17:03:52
Beauty!
Beauty!
0 2024/01/02 17:03:39
The finished product
The finished product
0 2024/01/02 17:03:19
Inside the S/C
Inside the S/C
0 2024/01/02 17:01:06
Donor engine
Donor engine
0 2024/01/02 17:00:55
Donor engine coming out
Donor engine coming out
0 2024/01/02 17:00:44
Donor car
Donor car
0 2024/01/02 17:00:34
Beautiful donor car
Beautiful donor car
0 2024/01/02 17:00:23
Seized engine from bottom...no way to remove torque converter bolts...so this is the way!
Seized engine from bottom...no way to remove torque converter bolts...so this is the way!
0 2024/01/02 17:00:15
0 2024/01/02 17:00:06
Dropping the cradle, engine, and trans!
Dropping the cradle, engine, and trans!
0 2024/01/02 16:59:56
The better one!
The better one!
0 2023/07/06 11:36:10
The new modular design 🤣🤣🤣 Put the old one back in smooth as glass...but ordered the new German one!
The new modular design 🤣🤣🤣 Put the old one back in smooth as glass...but ordered the new German one!
0 2023/07/05 10:18:11
The missing chunk!
The missing chunk!
0 2023/07/05 10:17:31
Buy the German version
Buy the German version
0 2023/07/05 10:08:47
Ill assume the missing piece was the impact sound I heard.
Ill assume the missing piece was the impact sound I heard.
0 2023/07/05 10:08:16
0 2023/06/16 15:45:11
Drives side view..no removable plates for access.
Drives side view..no removable plates for access.
0 2023/06/16 15:44:23
Sensor ring
Sensor ring
0 2023/06/16 15:43:43
The sensor ring with visable bolt head.
The sensor ring with visable bolt head.
0 2023/06/16 15:43:16
View with inspection plug removed. Access to rear of bolts only. No nuts.....
View with inspection plug removed. Access to rear of bolts only. No nuts.....
0 2023/06/16 15:42:59
Its possible this spot gets into a fight with myself and a Dremel tool if all else fails!
Its possible this spot gets into a fight with myself and a Dremel tool if all else fails!
0 2023/06/16 15:42:07
0 2023/06/15 18:03:55
0 2023/06/15 18:02:44
0 2023/06/15 18:00:57
The "signal" ring...no access to the head of the bolts here.
The "signal" ring...no access to the head of the bolts here.
0 2023/06/15 17:59:20
From the inspection port, not a nut, so no luck there.
From the inspection port, not a nut, so no luck there.
0 2023/06/15 17:58:25
Carrier also centered again!
Carrier also centered again!
0 2023/05/27 21:35:22
0 2023/05/27 21:34:36
Trans mount.now centered.
Trans mount.now centered.
0 2023/05/27 21:33:55
Out with the old...in with the newer to me!!!
Out with the old...in with the newer to me!!!
0 2023/05/27 21:33:18
0 2023/05/24 20:12:58
The rubber ring was not damaged , it was sagged out leaving the shaft not centered at rest. This supports the lower section and leaves the upper more flexible.
The rubber ring was not damaged , it was sagged out leaving the shaft not centered at rest. This supports the lower section and leaves the upper more flexible.
0 2023/05/24 20:06:49
Carrier bearing shaft has been centered, and urethane is used only on the bottom to reverse the effects that heat, gravity, and torque. This leave the top more flexible to allow for easier upward movement during pinion angle changes.
Carrier bearing shaft has been centered, and urethane is used only on the bottom to reverse the effects that heat, gravity, and torque. This leave the top more flexible to allow for easier upward movement during pinion angle changes.
0 2023/05/24 20:06:04
These things must be pretty tough!
These things must be pretty tough!
0 2023/05/24 20:05:27
Let it dry 24 to 48hrs.
Let it dry 24 to 48hrs.
0 2023/05/24 20:04:43
Trans mount centered and started filing with urethane!
Trans mount centered and started filing with urethane!
0 2023/05/24 20:03:56
Jagaur reccommends not seperating the coupler from the driveshaft. They want to sell the driveshaft front to back complete. Think it is $1100 to $1400. Think I bought the coupler for about $80-$90.
Jagaur reccommends not seperating the coupler from the driveshaft. They want to sell the driveshaft front to back complete. Think it is $1100 to $1400. Think I bought the coupler for about $80-$90.
0 2023/05/24 20:03:08