Wheel spacers for cars with carbon ceramics
#1
Wheel spacers for cars with carbon ceramics
Groupbuy:
Ok so the details are all the same as before. The manufacturer is motorsport tech and if 10 people commit, we'll get them at $180.00.
The only difference with respect to the carbon ceramics is that the hat surface is not flat, and therefore the OD of the spacer needs to be smaller at about 139mm instead of the 150mm of the other batches . Attached is the best pic I have at the moment.
Please reply here if you're interested.
Ok so the details are all the same as before. The manufacturer is motorsport tech and if 10 people commit, we'll get them at $180.00.
The only difference with respect to the carbon ceramics is that the hat surface is not flat, and therefore the OD of the spacer needs to be smaller at about 139mm instead of the 150mm of the other batches . Attached is the best pic I have at the moment.
Please reply here if you're interested.
Last edited by Mpowerr; 01-16-2017 at 11:15 AM.
#5
https://www.jaguarforums.com/forum/f...4/#post1624091
They look like 15mm spacers.
#6
Hey, yes you are right. I'm very impatient and after a month of no reply or interest shown in this thread I went ahead and ordered 1 custom set for myself which is about double the price of what it would have been if I had 10 more "interested". Oh well...
#7
Trending Topics
#8
#9
Everyone said it'll get better as I get older... However I'm no better than I used to be, still check tracking every ****ing hour after ordering something and then rip through the packaging the moment I get my hand on it.
Unhinged, I totally understand the logic, if we can call it that. Not sure there is a cure for our condition
Unhinged, I totally understand the logic, if we can call it that. Not sure there is a cure for our condition
#10
#11
Nope , I hit 60 in a few months and less patient then ever. Two reasons, as you get older you know what is possible and lose patience with those that think it cannot be done and....as you get older you realize time is running down on you. Sorry to take this thread so philosophical!
#12