2011 Audi S4 DISO repair ( video )
#1
2011 Audi S4 DISO repair ( video )
Hi guys
I have a 2011 Audi S4 whos looking for enhancement detail to take care of some DISO! (dealership install swirls option) sad thing is that I warn him about it. anyways the day was suppose to rain, but customer still wants the detail, luckily it got sunny during the afternoon. start 10am - end 5 pm.
Wheels Tires
Paint
LSP
Interior
Click on Image for Video!
I have a 2011 Audi S4 whos looking for enhancement detail to take care of some DISO! (dealership install swirls option) sad thing is that I warn him about it. anyways the day was suppose to rain, but customer still wants the detail, luckily it got sunny during the afternoon. start 10am - end 5 pm.
Wheels Tires
- Brown royale 3:1
- Kranzle 1120 T
- Various brushes
- 1z rubber protectant
Paint
- OPT powerclean 10:1 presoak
- High pressure rinse
- ONR wash
- Riccardo clay
- Iron X
- ONR lube
- MF towels
- IPA 3:1
- 3M yellow masking tape
- GG DA
- 5 in Meg bp, 3 in LC bp
- Uber 5 in & 3 in green pad, Uber yellow for spot compound
- Meg 205, OPT spray compound for spot
LSP
- CG ez glaze
- Werkstat Jett sealant
Interior
- MS leather & plastic cleaner
- 1Z cockpit
- MF towels
- ONR on DJ
- Metro vac
Click on Image for Video!
#2
Some photos, Enjoy
Before
This is cause by not breaking down polish or polish is too heavy of a cut.
A good foot long RID ( random isolated defect) that I was able to remove half of it ( can be seen in after video)
High power Fenix Tk11 highlighting the holograms
Interior wasn't too bad, just a wipe down and powerwash mats
Exhaust is showing about 1-2 weeks of carbon, all clean up with some APC and sealed with Opti-seal
1-2 weeks of brake dust
Some grime from rain fall
Trunk is vacuum and organized
Rubber mats getting clean with Swissvax brush and APC
Sorry not many wash pictures, but this is how water should look like with no protection on paint
Pre-soak ONR to aid a safer wash
ONR wash with a fluffy MF towel fold with 8 sides, when one side gets dirty, fold to the next.
and Dry with MF towel with ONR as drying aid also
a New clay
Before
This is cause by not breaking down polish or polish is too heavy of a cut.
A good foot long RID ( random isolated defect) that I was able to remove half of it ( can be seen in after video)
High power Fenix Tk11 highlighting the holograms
Interior wasn't too bad, just a wipe down and powerwash mats
Exhaust is showing about 1-2 weeks of carbon, all clean up with some APC and sealed with Opti-seal
1-2 weeks of brake dust
Some grime from rain fall
Trunk is vacuum and organized
Rubber mats getting clean with Swissvax brush and APC
Sorry not many wash pictures, but this is how water should look like with no protection on paint
Pre-soak ONR to aid a safer wash
ONR wash with a fluffy MF towel fold with 8 sides, when one side gets dirty, fold to the next.
and Dry with MF towel with ONR as drying aid also
a New clay
#4
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)