Hi
I was just wondering if anyone has replaced their a/c condenser?. Mine has a big leak so was thinking of doing it myself so had vented all. I understand the front bumper needs removing but not sure what else after.
If anyone has see a DIY guide that would be great.
Thanks

 

Welcome to the forums fpace76,

As a newbie, you can't download attachments from the forum so there is no point in posting the procedure as a PDF or DOC attachment.

You give no indication of LOCATION but your IP Address tells me it is England so the vehicle is almost certainly RHD. You also give no MODEL or YEAR but the greatest proportion of F-Pace sales here have been 2.0 D from 2019 or earlier.

The Workshop Manual gives 3 separate procedures depending on powertrain:



I only have the full Manual for my INGENIUM l4 2.0 Petrol but this also covers the l4 2.0 Diesel. As you expected, the first step is removal of the front bumper followed by:
















Please read the guidance for new members ( https://www.jaguarforums.com/forum/n...ned-up-241802/ ) which answers many of the most frequent questions about getting started.

Enjoy the forums.

Graham

 

Thanks so much Graham, all your assumptions were correct - RHD, 2.0d, 2018my

I’ll take a look through the images tonight.

Best Regards

 

If you decide to go ahead with DIY, post again if you then need the Manual extract for front bumper removal.

Graham