Auto High Beam Assist retrofit
#1
Auto High Beam Assist retrofit
I recently added homelink to my car by purçhasing a rear view mirror that had the three home link buttons on the bottom of the mirror. It was relatively easy to swap this with the existing mirror. However there is a big difference in the mirrors as the replacement mirror seems to have a camera on the bottom. I believe this is for the high beam assist. So the question to all you knowledgeable folks, do I now have auto high beam assist, assuming I get the CCF file changes, or is there issues with things like wiring ?
#2
#4
I have AHB, Auto-On Lights, and Auto-Wipers deployed at all times. All work perfectly when needed and not needed. Never even think about wipers and lights anymore. Real nice, but not a necessity.
#5
I tried AHB when I first got the car but found it wasn't as fast as I'd like on some of my regular roads. There are some blind corners where an oncoming car doesn't get detected until it's in full view of the camera, so gets a moment of high beams, where I can see the indirect light ahead of time and dip then in anticipation.
Auto-wipers are great though. The only thing I fiddle with there is the sensitivity, and only when it's heavy fog or light mist. Perhaps also because I need to fiddle with *something*.
Auto-wipers are great though. The only thing I fiddle with there is the sensitivity, and only when it's heavy fog or light mist. Perhaps also because I need to fiddle with *something*.
#6
#7
Trending Topics
#8
#9
#10
#11
It was second hand off eBay. No wiring needed, just plug in, get the CCF updated and you're away!
#13
Thread
Thread Starter
Forum
Replies
Last Post
Blown Income
XJ XJ8 / XJR ( X308 )
2
05-11-2019 06:35 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)