P 7 Bumper-less Grille Installed
Senior Member
Joined: Jun 2014
Posts: 682
Likes: 245
From: Southern Cal
More importantly, how are your sensors working? Well? OK with intermittent problems? Or constant false alarms?
So you went for a satin black surround instead of the chrome you originally intended. Did you attempt to wrap or paint chrome, or you didn’t bother to go there?
More importantly, how are your sensors working? Well? OK with intermittent problems? Or constant false alarms?
More importantly, how are your sensors working? Well? OK with intermittent problems? Or constant false alarms?
Tried chrome wrap, but too stiff to work. Chrome paint looks like chrome paint. Just wrapped it in satin black to give it a mild contrast to the gloss grille.
Sensors work well. No intermittent problems and no false alarms. The right center sensor was early indicating compared to the left center one until I snapped it into the correct location today.
Veteran Member
Joined: Feb 2014
Posts: 9,016
Likes: 3,657
From: Adelaide, South Australia
Tried chrome wrap, but too stiff to work. Chrome paint looks like chrome paint. Just wrapped it in satin black to give it a mild contrast to the gloss grille.
Sensors work well. No intermittent problems and no false alarms. The right center sensor was early indicating compared to the left center one until I snapped it into the correct location today.
Sensors work well. No intermittent problems and no false alarms. The right center sensor was early indicating compared to the left center one until I snapped it into the correct location today.
You're not going to let me live this one down, are you?
Yes indeed...Great thanks to mshedden for noticing that. It would have taken me years to see that myself.
Yes indeed...Great thanks to mshedden for noticing that. It would have taken me years to see that myself.
Senior Member
Joined: Mar 2017
Posts: 800
Likes: 243
From: So Cal
I don't believe he is still able to get them, at least a few months ago he was not. Alot of guys these days with printers, i asked a local tuning group i follow on FB and got 10 responses from people willing to try, with the sketches Jluez1/Meister Kajo/Unhinged posted it is an easy job.
Senior Member
Joined: Aug 2014
Posts: 701
Likes: 192
From: Central Virginia
LOL. My OCD detects these things in a micro second. That said, its also delayed such that I only notice forgetting the bolt from step 2 when finishing step 14, so I hope at least the work required to remedy was less than equal to doing it all over from scratch!
No problem at all. The holders snap into the honeycombs and the honeycombs are plenty big enough for me to get my fingers in there and relocate the sensor from the front. Took about 10 seconds.
Veteran Member
Joined: Sep 2015
Posts: 3,082
Likes: 772
From: Pennsylvania
?
?lil O'l me?
Senior Member
Joined: Oct 2016
Posts: 163
Likes: 41
From: Bavarian, GER
Hello friends, have just met my friend and this informed me that he can print adapter again. This gives access to the 3d printer again.
If you want to have some and interest, please contact me.
If you want to have some and interest, please contact me.
Senior Member
Joined: Mar 2018
Posts: 122
Likes: 11
From: Essex
Senior Member
Joined: Jun 2017
Posts: 383
Likes: 154
If he can't get them, I had them modeled and will have the prototype in my hands early next week. I'll post a pic or two..
