2006 Stype R ECU remap
Thread Starter
|
Junior Member
Joined: May 2013
Posts: 3
Likes: 0
From: toronto
2006 Stype R ECU remap
Dear Members,
After adding a 2.5lb. upper pulley (10%(, porting of blower, 200 cell cats with 3 inch exhaust and a big intake pipe, Vizeu cannot do a remap after 3 attempts, saying that it is a known issue with the Alientech program. It would have been nice to know before making the modifications as I now risk damage to the motor if I step on it. I have been in touch with PVE and they only make a replacement ECU for manual transmission cars and the injectors would have a hard time keeping up and extra AIT heat rises dramatically with the 10% pulley.
Help from previous experience would be be appreciated.
Mark.
After adding a 2.5lb. upper pulley (10%(, porting of blower, 200 cell cats with 3 inch exhaust and a big intake pipe, Vizeu cannot do a remap after 3 attempts, saying that it is a known issue with the Alientech program. It would have been nice to know before making the modifications as I now risk damage to the motor if I step on it. I have been in touch with PVE and they only make a replacement ECU for manual transmission cars and the injectors would have a hard time keeping up and extra AIT heat rises dramatically with the 10% pulley.
Help from previous experience would be be appreciated.
Mark.
Thread
Thread Starter
Forum
Replies
Last Post
sales@ECU Tuning Group
F-Type ( X152 )
50
Jan 26, 2020 02:03 PM
TMack
XF and XFR ( X250 )
7
Feb 9, 2014 08:40 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)