Sorry, bad cut&paste. I cant's find a way to edit my previuos msg ...

EDIT: finally managed to clear my previuos post

407 WDCMB
464
475
4b3 IGM
710 CHCMG
716 SDLC
720 IPCM
726 BCMH
730 PSCMG
731 RFA
732 GSM
734 HCMAD
737 RCM
740 DDM
741 PDM
742 DRDM
743 PRDM
744 DSMG
747 EPICB
751 TPMS
764 CCME
775 RGTM
785 RHVAC
792 ATCM
797 SASM
7a2 IDMA
7a3 PSMG
7b2 HUD
7c3 HCMBD
7c4 SDDLF
7c6 SODRF
7d7 (no answer when PID scanned)
7e0 PCM
7e3
7e4 BECM
7e5 BCCM
7e6 ABS
7e7 SGCM

 

TCU = 754

 

Not on MY21. It does not show in broacasting messages nor it responds to direc queries. It eihter has a different address or it has been hidden on the Canbus ...

 

Interesting. If it's a MY21 then it likely uses the new EVA architecture. This is something I haven't had the need to look into thus far.

Please send me the VIN in a PM.


EDIT:

I just finished checking a Facelift MY21 and it does use EVA2 and can confirm the node is still 754.

475 = High Voltage Charging Contactor Module (HVCCM)
7E7 = Starter Generator Control Module (SGCM)

 

Ok, so if it's on 754 do you have any idea why/how it'a accessible on the Canbus? I need to get the GPS location of the car as inside the cabin many phones, especially Android, have problems as well as GPS navigators such as Gramin's.
BTW, I can't access HVAC moldule and EPIC modules as well. COuld it be all correlated ?

 

Hello,
I am currently looking at installing an I-Pace battery pack into an EV conversion project and I was hoping you might be able to sent some Can data logs for the BMS system? I would be incredibly appreciative.