Can anyone direct me to a website that would carry a chilton manual or something similar that gives a complete repair guide??


Thanks

 

jagman, what vehicle are we talking about here? That might help us narrow things down for you. If you are talking about something from say 95-04, there are repair guides that you can download here. Newer than that, odds are you are looking at a service like Alldata.com. Older than 95, probably a special order through your local auto parts store. But, with the car, we can narrow things down even more.

 

Sorry Thermo, forgot to mention that. Still a little new here!!

2000 S Type 3.0L


I found the JTIS Manual link on Mediafire but cannot get it to open or save in some cases.

If you have any other suggestions i would love to hear them!!


Thanks!!

 

I have downloaded every single flippin one of these and NONE of them work........????

http://www.mediafire.com/?sharekey=0...6b94653a3044fd

 

jagman, look on here. There is a link under the "general Discussion" board about downloading the JTIS. That will have all the info that you are after. I have downloaded that one and it worked for me.

 

THanks for the advise THermo. I followed it and found what i thought would be a better file but i was wrong. Every time i download and unzip it says my file is corrupt. i tried 3 different times to unzip and install but to no avail.

I will keep looking for a better seed.

i have also tried to downlaod and install using windows 7 on a different pc.

 

TBH, it's a damn sight easier to just buy one from eb@y for a few bucks - http://cgi.ebay.com/ebaymotors/Jagua...sQ5fLiterature

 

If anyone gets JTIS to work on a 64 bit Windows 7 please let me know.

 

I have heard some people have had success using the Virtual PC XP mode - http://www.microsoft.com/windows/vir.../download.aspx

 

You have to have Windows 7 Professional to download the XP compatability for use with the Virtual PC aspect of w7.

I'm still looking for another option.....

 

Oooops, didn't notice that, I just clicked the drop down list and it showed every version, I didn't actually select one to see the message that says Pro or above only!

 

It's cool. I appreciate the help!!

 

I subscribed to ALLDATAdiy.com, and it seriously lacks in pictorials. Do you think someone there could make a simple diagram of the engine with an arrow pointing to the MAP sensor? Apparently not.

Do I have an opinion about ALLDATAdiy? Not yet, but so far they can't hold a candle to Chilton's.

 

Ok, so I broke down and bought the CD off of ebay and to NO avail; the dang thing will not work on windows 7 w/o that stupid Virtual PC software that you can only get o the professional version.

Sigh.......why is this soooooooo flippin' difficult????

 

Sadly for you guys, the answer is quite simple, in 2004 when the final JTIS was released, Windows 7 and Vista hadn't even been dreamt of, 64 bit computers certainly weren't in general use never mind in home PCs, it was designed for the technology of the day, in much the same way cars from that era don't have DAB and DVB.

 

I concur sir.




Admin, please close this thread, thank you.

 

When everytihng goes to 64-bit, I plan on keeping an XP home laptop (or one of those tiny notebooks) with just my AE software, the JTIS, and a browser to talk to you guys.

 

You wanna know the real comedy/tragedy in all this for me????

I have an old Sony Vaio laptop that is runing Xp but the disk drive doesn't work.

 

I said to heck with it, I have a spare PC in the Den and just installed XP on one of the drives so I could boot wither version; XP or 7.


Got my JTIS up and running now and it's pretty nice so far. Love the interface!