General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

Radio Help Please

Old Nov 30, 2017 | 09:25 AM
  #1  
02jagguy's Avatar
Thread Starter
|
Junior Member
Joined: Nov 2017
Posts: 2
Likes: 0
From: New England
Default Radio Help Please

Hey guys so I need some help with my 02 X-type stock radio

It plays nothing, no sound whatsoever. I have removed a door panel and tested with another speaker and still nothing. I haven't pulled the radio. I am curious what you would do. Should I look at fuses/amp/wiring/back of radio/speakers again? It's been like this too long and drives are wayyy too boring
 
Reply
Old Nov 30, 2017 | 12:34 PM
  #2  
rhomanski's Avatar
Senior Member
Joined: Oct 2017
Posts: 962
Likes: 171
From: Batesville Arkansas
Default

After I put the Borla exhaust system on my Corvette, I didn't want to listen to the radio for a long time. I can just imagine what a Borla would sound like on a supercharged like mine.

Check fuses first , then pull the amp/radio and see if it's even plugged in. Does the radio light up and look like it's working?
 
Reply
Old Nov 30, 2017 | 01:48 PM
  #3  
02jagguy's Avatar
Thread Starter
|
Junior Member
Joined: Nov 2017
Posts: 2
Likes: 0
From: New England
Default

Unfortunately this ole 3.0 doesn't have quite the tone of a borla supercharged corvette hahah
Any ideas if I should be looking at fuse block under the hood or in trunk? Or just the under dash one?

Radio turns on, looks like it should work, changes channels everything
 
Reply
Old Nov 30, 2017 | 08:20 PM
  #4  
rhomanski's Avatar
Senior Member
Joined: Oct 2017
Posts: 962
Likes: 171
From: Batesville Arkansas
Default

I can't really say about yours since mines from a different generation. I have the manual for the 2010 on up XJ but not yours I'm afraid. Since the radio appears normal I'd be thinking it has a separate amp and that's where to look. Mine has the B&W system and the manual shows the amp on the left side of the trunk. I would guess the fuse is there. Wish I could point you right at it but maybe that will get you started.
 
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:56 AM.