Hello again all! Heres my latest problem. I got a flat and i'm trying to change the tire. I took off all lug nuts and the tire still wont come off. Is there a center locking nut or something that i need to remove from the center of the wheel as well? Is there a special tool that i need or is it stuck somehow? Please help again i dont want to damage the rim.

 

Lug nuts are it. I think the wheel is just rusted to the rotor. May need to use more elbow grease.

 

thank you so much, i'll try that right away.

 

A big rubber mallet.....
Contact me if you need any work done, were pretty local.

myglimk2

 

If you can't get em off, an old truck drivers method, loosen all the nuts just half a turn, remove the jack and drive it 2/3 yards/metres. That should break the seal.

 

Thanx guys for all the help. I tried the rubber mallot method and finally got it off so i"m riding again!! Thanx again guys.

 

When you replace the wheel use a smear of Coppaslip on the mating face.