240 engine bay plate
#1
#2
Join Date: Jul 2012
Location: Llandudno, Cape Town, South Africa
Posts: 5,100
Received 1,342 Likes
on
1,046 Posts
#3
you 're right
must be something like this
https://www.sngbarratt.com/uk/#!/Eng...b-92e85d1f0868
but now has been totally faded
there is no other plate in oval and such dimensions
many thanks
must be something like this
https://www.sngbarratt.com/uk/#!/Eng...b-92e85d1f0868
but now has been totally faded
there is no other plate in oval and such dimensions
many thanks
#5
Join Date: Jul 2012
Location: Llandudno, Cape Town, South Africa
Posts: 5,100
Received 1,342 Likes
on
1,046 Posts
Well it certainly was upside down on cass' car that I show above & that's why he replaced it that way after restoration. His is not the only car I've seen like this from Browns Lane. This was 1968 production.
I have a feeling you are going to find examples of it both ways. Jaguar was not that consistent. I have seen one (bad) picture of it the other way round and of course many cars did not have it at all.
I have a feeling you are going to find examples of it both ways. Jaguar was not that consistent. I have seen one (bad) picture of it the other way round and of course many cars did not have it at all.
#6
Thread
Thread Starter
Forum
Replies
Last Post
Lambretta
MKI / MKII S type 240 340 & Daimler
17
04-15-2019 06:51 PM
Vector
US Lower Atlantic
0
06-05-2015 05:05 AM
FrenchJagman
MKI / MKII S type 240 340 & Daimler
5
10-19-2011 04:00 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)