Fitting Aftermarket Reversing Sensors 2003 S-Type
Thread Starter
|
Junior Member
Joined: May 2018
Posts: 7
Likes: 0
From: Cumbria UK
Fitting Aftermarket Reversing Sensors 2003 S-Type
re the above, I've wired them up to the rev' light wire and earthed (black wire) to the chassis. They sort of work but are live all the time even when the car is not in reverse. I'm thinking that the earth wire should go to an earth or negative in the loom? Any help on this matter would be appreciated, thanks
Joined: Oct 2007
Posts: 121,150
Likes: 6,655
From: PHX some of the time
Welcome to Jaguar Forums colin1952,
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Joined: Dec 2011
Posts: 120,439
Likes: 17,014
From: Durham, UK
Welcome to the forum colin1952,
Good to have you with us at Jaguar forums.
Could be more complicated than that. The tail lamps are controlled through the RECM (Rear Electronic Control Module) and the PACM (Parking Aid Control Module) on an OE installation.
Follow this link https://www.jaguarforums.com/forum/s...ed-v8-x200-15/ to the S-Type forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the UK & Eire Region forum by following this link https://www.jaguarforums.com/forum/uk-eire-68/ to find other members in your region.
Enjoy the forums.
Graham
Good to have you with us at Jaguar forums.
Could be more complicated than that. The tail lamps are controlled through the RECM (Rear Electronic Control Module) and the PACM (Parking Aid Control Module) on an OE installation.
Follow this link https://www.jaguarforums.com/forum/s...ed-v8-x200-15/ to the S-Type forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the UK & Eire Region forum by following this link https://www.jaguarforums.com/forum/uk-eire-68/ to find other members in your region.
Enjoy the forums.
Graham
Joined: Jan 2014
Posts: 28,386
Likes: 6,340
From: Delaneys Creek,Qld. Australia
Trending Topics
Joined: Dec 2011
Posts: 120,439
Likes: 17,014
From: Durham, UK
Colin was last on the forum in 2018 only two days after posting the question so unlikely to get a reply. I suggest a new post in S-Type forum and an Intro from you would also be a nice courtesy.
Graham
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)