It is 2012 XJL Portfolio, ~35K miles. Driven ~4K miles per year and serviced at dealership at least in the young days. Cosmetically, it is like new, mechanically, there are no issues/concerns to address immediately.

As you can see there is no front number plate holder installed, however, I am given a frame for this purpose. I am a handy man type. How should I proceed to install this

 

Please recommend a good indy near 07090 (Union, NJ). Thanks.

 

Welcome aboard.

 

Welcome to the forums TheJagued,

Front number plate holders are normally fitted with self tappers or rivets after drilling suitable holes. I have mine (standard European rectangular) fixed with 3M double sided tape but this may not be suitable for the weight/size of a US holder and plate. If you are going to drill, check first for the location of any electrical harness (e.g. for the parking aid) fitted behind the front bumper.

Follow this link https://www.jaguarforums.com/forum/xj-x351-53/ to the X351 forum for help, advice and information. You can also use the US Northeast Region forum by following this link https://www.jaguarforums.com/forum/us-northeast-35/ to find other members in your region.

Please read the guidance for new members ( https://www.jaguarforums.com/forum/n...ned-up-241802/ ) which answers many of the most frequent questions about getting started.

Enjoy the forums.

Graham

 

Welcome to the Forums.

 

Hello,
Congratulations on your new Jaguar!
Welcome to the forums from ElinorB.
(';')

 

Welcome to Jaguar Forums TheJagued,

Good to have you with us.
Enjoy the forum.

If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help

 

welcome to the forum - enjoy! Thankful no front license plates required in SC