hey just want to thank this forum _ its has saved me tons of money _ I was intimidated when buying my 1st jag _ due to all the rumors of how expansive it was to maintenance it - but by reading & analyzing some post it really helped me do it my self so i did a video explaining on how to change The upper & lower intake manifold - spark plugs- im still having some hesitation so before i change the imt o rings & knock sensor is there anything else i can check?

 

Welcome to the forum magicjuan17,

Good to have you with us.
I see you are finding your way around, I'm going to copy your post over to the X Type Section for better answers, don't forget to enter the hood liner competiitiom.
Enjoy the forum.

If you haven't done so already you should add your car details to your signature to help others to help you.

 

Well done.

I've added your video to the X-Type 'HOW TO' sticky thread.

You'll see it under the 'Engine' list with your name next to it.

Graham

 

Thanks i appreciated I still have a bit of a hesitation/ so next will be the O-rings - Plan B- will be knock censer- great forum saved be a bunch

 

Your video technique of removing the fixings to be able to lift off the parts in a clean and quick sequence for the camera is very effective.

Good luck with the O Rings.

Graham

 

Hey & welcome aboard, good to have you here with us here at JF


Any useful information you may need such as how to post pictures, edit signatures, add videos, use the search facility etc, can be found here
Helpful_information


Please take the time to check out the regional section for your area?
There are lots of members local to you with the same interests.
Regional - Jaguar Forums - Jaguar Enthusiasts Forum


I've manually upgraded you to full forum access so you can better view the whole site and all its features.

Please Jump on in and enjoy the site.................

See you in the forums

 

Hi guys,
I followed the instructions and got the confirmation beep from the dash after programming but there seems to be a problem. When i press unlock, i can hear the actuator engage to unlock the door bit when i press lock i dont hear anything and the exterior lights flash 5 times. At the moment the trunk latch is not on the car bc of a bad actuator. Would that cause some kind of error with the locking system to not engage the actuator for the door locks? It wants to unlock just doesnt do anything or make any noise when attempting to lock other than the lights flashing.

 

I cant find how to edit posts if i even can yet so i apologize for the double post but i didnt mean to bump this thread. I was trying to post in the key fob post and have no idea how i made it here. I do apologize and admin may delete my posts on this thread.