When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
x-type 3.0i 2002 lin mode at 3000rpm cruise not work
New Member Area - Intro a MUSTNew to Jaguar Forums? Drop in and tell us about you, your ride and location. This is your chance to introduce yourself to the forum.
x-type 3.0i 2002 lin mode at 3000rpm cruise not work
x-type 3.0i 2002 lin mode at 3000rpm cruise not work
PLEASE HELP ME!
My 3.0i V6, X-type from 2002, don't want to go more than 2900 RPM. She stay in this lin mode all the time.
Olso, the cruise control don't work from a lot of time.
Can you tell me what can I do to fix it, please?
I was to the Jaguar store, here in Romania and they told me, it's impossible to connect the car with their original tester and put me out.
Please give me some instructions.
Best regards to all of you!
Hello, Raymond,
No need to apologize for the quality of your English. It's Way better than my Romanian.
Someone will be along soon to direct you to the proper section where you can get the help you need.
Welcome to the forums from ElinorB.
(';')
Good to have you with us. Here is some information on the error codes to get you started.
Code P1000 is NOT an error. it is a STATUS. You will ALWAYS see either P1000 or P1111:
P1000: all engine management OBD diagnostic monitor drive cycles HAVE NOT BEEN COMPLETED. P1111: all engine management OBD diagnostic monitor drive cycles HAVE BEEN COMPLETED.
As you have been trying to fix the limp mode fault and probably cleared the codes, that is why you see P1000. Here are the possible causes for P0333 and P1582:
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
x-type 3.0i 2002 lin mode at 3000rpm cruise not work
