I was planning on replacing the broken adjusters in both of my X-type HID headlights However, I’ve seen headlight assemblies on eBay that have been rebuilt, but without the washers.

my question is if the washers are not originally on the headlight assembly, can I use (attach) my current headlight washers to the used assembly? Are the black assembly bodies universal between the HID Xenon and the Halogen?

 

Welcome aboard.

 

Welcome to the Forums.

The members in the X Type (X400) Tech Section will know that answer.

Good luck.

 

Hello,
Someone will be along shortly to direct you to the correct section where you can find answers for that question.
Welcome to the forums from ElinorB.
(';')

 

Welcome to the forums.

 

Welcome to the forums RBaczek,

I've copied your question to X-Type forum for advice from members with the same model. Here's the direct link to it:
https://www.jaguarforums.com/forum/x...-build-238919/

Follow this link https://www.jaguarforums.com/forum/x-type-x400-14/ to the main XType forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues. You can also use the US Western Region forum by following this link https://www.jaguarforums.com/forum/us-western-38/ to find other members in your region.

I've added vehicle details to your Signature to help others to give relevant advice. If you want to change these, go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.

Enjoy the forums.

Graham

 

Welcome to Jaguar Forums RBaczek,

Good to have you with us.
Enjoy the forum.

If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help

 

welcome to the forum - enjoy!!!