Mark this thread as Unsold
WTB[NorthEast]: Who's parting out an x308? In need of small x308-specific trim parts...
#1
Who's parting out an x308? In need of small x308-specific trim parts...
I need random small trim parts that are proprietary to the x308:
- Jaguar-emblem that goes over the trunk button
- spray nozzle (on wiper blade)
- lamp fixture for rear side marker (US-spec drivers-side, just the bulb's fixture/base is needed)
- gray-plastic fitting that cradles the trunk light within the fabric-liner (need only one of the two fittings, just the plastic shell)
- plastic cover over the babyseat anchor (need 1 of the 3 on the rear deck)
- Jaguar-emblem that goes over the trunk button
- spray nozzle (on wiper blade)
- lamp fixture for rear side marker (US-spec drivers-side, just the bulb's fixture/base is needed)
- gray-plastic fitting that cradles the trunk light within the fabric-liner (need only one of the two fittings, just the plastic shell)
- plastic cover over the babyseat anchor (need 1 of the 3 on the rear deck)
Last edited by GGG; 11-17-2016 at 09:05 AM. Reason: Move from X308 and add WTB[Region]
#2
Contact the guy who runs the website I link below. He has a cornucopia of trim fittings(if you don't see it on the site, ask anyways he's likely got it) & is awesome to work with, godspeed !
http://www.everydayxj.com/
http://www.everydayxj.com/
The following users liked this post:
Johnny_B (09-18-2016)
#4
Add to the list a fully-intact not-cracked working rear vent assembly that goes into the rear of the center console (including the cigar lighter socket with green plastic light diffuser).
Mine is functional but has several plastic cracks in the vents and cigar lighter assembly, so I'm seeking a replacement without anything broken.
Mine is functional but has several plastic cracks in the vents and cigar lighter assembly, so I'm seeking a replacement without anything broken.
#6
How much £ are you seeking including shipping them to nyc? The cumulative weight of all the parts should be under 2 lbs.
The following users liked this post:
vdpnyc (10-30-2016)
Trending Topics
#8
Hi Stu, You wouldn't happen to have the small triangle that goes at the front bottom of the front passenger window, on the inside would you?
Last edited by SteveSheldon; 10-31-2016 at 07:16 AM.
#9
I will have a look for you, I know it isn't here but it may be with the rest of my spares. Sadly they are at my parent's house 30 miles away, so if you don't mind hanging on until I get there. Probably later in the week.
The following users liked this post:
SteveSheldon (10-31-2016)
#11
Just asking; what about the black front speaker cover (plain, no badge on it)?
Mine is cracked in the center.
Not visible if all parts are in place, but once a while I bump it and need to push all parts in place again.
Not in a hurry at all.
#14
Ron B. hooked me up with most of the parts, the only two remaining that I need are:
- spray nozzle (on wiper blade)
- fully-intact not-cracked working rear vent assembly that goes into the rear of the center console (including the cigar lighter socket with green plastic light diffuser). Mine is functional but has several plastic cracks in the vents and cigar lighter assembly, so I'm seeking a replacement without anything broken.
Plus maybe I'll need to swap my j-gate and/or shifter-cable - TBD soon...
- spray nozzle (on wiper blade)
- fully-intact not-cracked working rear vent assembly that goes into the rear of the center console (including the cigar lighter socket with green plastic light diffuser). Mine is functional but has several plastic cracks in the vents and cigar lighter assembly, so I'm seeking a replacement without anything broken.
Plus maybe I'll need to swap my j-gate and/or shifter-cable - TBD soon...
#15
Hi Stu, Any progress on the plastic inner cover for the front bottom corner of the front passenger door?
#16
Moved from X308 to PRIVATE For Sale / Trade or Buy Classifieds forum.
No For Sale or Wanted to Buy in the model tech forums.
Graham
No For Sale or Wanted to Buy in the model tech forums.
Graham
Last edited by GGG; 11-17-2016 at 09:05 AM.
#17
Anyway, I haven't got one in my spares and I apologise for not getting back to you sooner, it slipped my mind as I've been busy at work. I can however lay my hands on one easily, if you'd like to PM me with your address I'll post it to you as soon as I get it.
The following users liked this post:
SteveSheldon (11-20-2016)
#19
Stu, hard to find you back after you were banned to the obscure area of the classifieds, and that while you not even started this thread .
The speaker covers arrived yesterday, and I feel guilty for the professional packaging and the little price I paid for it.
I might not need other things to make up for it, but I hope this small recommendation will help you to land the big fish.
Thanks again, most appreciated!
Eric
The speaker covers arrived yesterday, and I feel guilty for the professional packaging and the little price I paid for it.
I might not need other things to make up for it, but I hope this small recommendation will help you to land the big fish.
Thanks again, most appreciated!
Eric
Thread
Thread Starter
Forum
Replies
Last Post
jackra_1
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
7
12-19-2017 12:20 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)