PRIVATE For Sale / Trade or Buy Classifieds Want to Sell / Trade or buy for free? Then this is your section. NO COMMERCIAL posts. PLEASE COMPLETE THE PREFIX OPTION WHEN MAKING A POST FOR BEST RESULTS Please note: Any /all transactions are made entirely at members own risk, the forum cannot and will not be held responsible for any disputes arising.

FS[SouthWest]: XKR Take off Parts: After Twin Screw and Other Upgrades

 
Old Nov 10, 2013 | 09:54 PM
  #1  
ccfulton's Avatar
Thread Starter
|
Veteran Member
Joined: Jan 2012
Posts: 2,953
Likes: 1,120
From: Phoenix, AZ USA
Default XKR Take off Parts: After Twin Screw and Other Upgrades

After installing a twin screw and doing other customization I've accumulated some parts. It's an odd assortment, but these cars are getting to a certain age so might be of use to people who need them.

All prices are "or best offer" and many of them are free for a good home. Buyer pays the shipping.


Here goes...

$20 for set or $5 each: Cashmere dash inserts, speaker cover, side vents and center screw cover
XKR Take off Parts: After Twin Screw and Other Upgrades-dash_inserts.jpg

$20: Pair of cashmere defrost vents, used but decent shape, some of the front plastic clips broke when removing them
XKR Take off Parts: After Twin Screw and Other Upgrades-defrost_vent.jpg

$5: Dipstick, a little faded from the sun through the bonnet vent but good o-ring seal
XKR Take off Parts: After Twin Screw and Other Upgrades-dipstick.jpg

$15: Left side interior door handle, cashmere color, driver side with memory seat opening
XKR Take off Parts: After Twin Screw and Other Upgrades-left_doorhandle.jpg

$15: Light sensor for automatic headlights, cashmere colore
XKR Take off Parts: After Twin Screw and Other Upgrades-light_sensor.jpg

$15: Right side interior door handle, cashmere color, passenger side
XKR Take off Parts: After Twin Screw and Other Upgrades-right_doorhandle.jpg

$10: Supercharger belt idler pulley, for use with upgraded ribbed on both sides style belt, bearing in good shape, changed only because twin screw has smooth belt
XKR Take off Parts: After Twin Screw and Other Upgrades-sc_pulley.jpg

$150 for pair, $90 each: 2003+ jewel style tail lights, perfect condition, come with bulbs
XKR Take off Parts: After Twin Screw and Other Upgrades-tailights.jpg

$25: Headlight washer pump
XKR Take off Parts: After Twin Screw and Other Upgrades-washer_pump.jpg

-------------------------------
Sold: Turn signal repeaters, OEM orange color, comes with the bulb socket, one side has a slight crack in the plastic retaining clip
XKR Take off Parts: After Twin Screw and Other Upgrades-repeater.jpg

Sold: Stock gas pedal and brake pedal cover
XKR Take off Parts: After Twin Screw and Other Upgrades-pedal_covers.jpg

Sold: New gates serpentine belt idler
XKR Take off Parts: After Twin Screw and Other Upgrades-serpentine_pulley.jpg

Sold: New Gatorback supercharger belt, for use with smooth idler pulley
XKR Take off Parts: After Twin Screw and Other Upgrades-sc_belt.jpg

Sold: Gen 5 Eaton M112, 70k miles, oil changed at 60k, coatings in good shape, helical gears and better bearings than the early model, good candidate for porting and pulley
XKR Take off Parts: After Twin Screw and Other Upgrades-eaton1.jpg XKR Take off Parts: After Twin Screw and Other Upgrades-eaton2.jpg
Sold: XKR bypass valve actuator, 70k miles but good diaphragm
XKR Take off Parts: After Twin Screw and Other Upgrades-bypass_actuator.jpg

Sold: XKR bypass hoses, used but in good shape
XKR Take off Parts: After Twin Screw and Other Upgrades-bypass_hose.jpg
Sold: Two fittings from the breather system, good o-rings.
XKR Take off Parts: After Twin Screw and Other Upgrades-breather_fitting.jpg

Sold: 4.2L throttle body, 70k miles, good take off part with sensors and connectors
XKR Take off Parts: After Twin Screw and Other Upgrades-throttlebody.jpg

Sold: New intake gaskets for AJ27 (I bought the wrong set)
XKR Take off Parts: After Twin Screw and Other Upgrades-gasket.jpg

Sold: Cold air intake snorkel for 4.2L. Don't ask what happened to the rest of the air box.
XKR Take off Parts: After Twin Screw and Other Upgrades-airbox_tube.jpg

Sold: New cowel screw cover cap, black color
XKR Take off Parts: After Twin Screw and Other Upgrades-cowel_plug.jpg
 

Last edited by ccfulton; Feb 25, 2014 at 10:36 PM. Reason: Updating Sold
Old Nov 11, 2013 | 11:34 AM
  #2  
jaguarcraver's Avatar
Senior Member
Joined: Feb 2011
Posts: 433
Likes: 56
From: Marion, IL
Default

Charlie, I would appreciate the two free fittings. I can send you something for ship and postage. Please let me know. Thank you, Louis
 
Old Nov 11, 2013 | 12:21 PM
  #3  
jaguarcraver's Avatar
Senior Member
Joined: Feb 2011
Posts: 433
Likes: 56
From: Marion, IL
Default

Sold on the throttle body and AJ27 Intake gaskets. PM sent.
 
Old Nov 11, 2013 | 01:19 PM
  #4  
jaguarcraver's Avatar
Senior Member
Joined: Feb 2011
Posts: 433
Likes: 56
From: Marion, IL
Default

Would you also put sold on bypass valve actuator and bypass hoses, please. Sorry about so many replies. Thank you again, Louis
 
Old Nov 11, 2013 | 07:51 PM
  #5  
Badbenz94's Avatar
Senior Member
Joined: Aug 2013
Posts: 360
Likes: 42
From: Joliet, IL
Default

Would that supercharger fit my 01 XJR?

Thanks!
Chris
 
Old Nov 12, 2013 | 07:23 AM
  #6  
ccfulton's Avatar
Thread Starter
|
Veteran Member
Joined: Jan 2012
Posts: 2,953
Likes: 1,120
From: Phoenix, AZ USA
Default

Originally Posted by Badbenz94
Would that supercharger fit my 01 XJR?

Thanks!
Chris
I believe so but there may be some small differences in the stock pulley because it comes from a 4.2L.
 
Old Feb 10, 2014 | 08:47 AM
  #7  
Laimoniux's Avatar
Junior Member
Joined: Nov 2012
Posts: 1
Likes: 0
From: LT
Default

Hi Charlie,

I'd be very intrested in idler puley, do You still have it?

$10: Supercharger belt idler pulley, for use with upgraded ribbed on both sides style belt, bearing in good shape, changed only because twin screw has smooth belt

I have teh new OEM belt ribbed both sides, but can't change it as pulley is still old...

Thanks id advance,
Laimonas
 
Old Feb 10, 2014 | 10:05 PM
  #8  
androulakis's Avatar
Veteran Member
Joined: Dec 2006
Posts: 2,964
Likes: 507
From: Hamilton, NJ
Default

I want the tail lights but can you work on the price a bit?

Also, do you know how complicated the install is on a 99?

Thanks,

George
 
Old Feb 12, 2014 | 12:52 PM
  #9  
ccfulton's Avatar
Thread Starter
|
Veteran Member
Joined: Jan 2012
Posts: 2,953
Likes: 1,120
From: Phoenix, AZ USA
Default

There is some info here about the work involved:
https://www.jaguarforums.com/forum/x...s-11507/page2/

PM me an offer.
 
Old Feb 22, 2014 | 08:11 AM
  #10  
Sirmicroby's Avatar
Member
Joined: Feb 2012
Posts: 52
Likes: 8
From: Granby, QC, Canada
Default

Hello Charlie,

I would like the $
10: Stock gas pedal and brake pedal cover

Still available??
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mrplow58
XK8 / XKR ( X100 )
19
Jan 21, 2024 05:53 AM
Johncy2000
XJ ( X351 )
13
Dec 22, 2017 04:32 PM
Foosh
F-Type ( X152 )
9
Sep 12, 2015 12:18 PM
lickahotskillet
XJ6 & XJ12 Series I, II & III
0
Sep 11, 2015 07:54 PM
sadepol01
XJS ( X27 )
4
Sep 11, 2015 05:26 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:32 AM.