S-Type / S type R Supercharged V8 ( X200 ) 1999 - 2008 2001 - 2009
Sponsored by:
Sponsored by:

Engine Noise and going off in traffic

Thread Tools
 
Search this Thread
 
Old Jul 22, 2012 | 08:52 PM
  #1  
sancho panza's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2012
Posts: 3
Likes: 0
From: Ottawa
Unhappy Engine Noise and going off in traffic

My jaguar s-type 2001 3.0 litre has been fantastic. Only oil and spark plug change for the past one and half years. Last week, I noticed an unusual rubbing sound from the engine. It stays on and off when my selector is in neutral or in parking position. It disappears when I shift into drive or reverse and driving is smooth. I have driven it to my mechanic twice but the noise never came. This grinding noise is tearing me apart and is now affecting smooth idle running of the engine. The engine runs well and smooth in motion but goes off in some few seconds in traffic. Since this problem started, I have been disturbed and not know what to do. I have nowhere I trust to take this problem to. I will be glad to hear from anyone who has any experience similar to this. I have checked the vacuum input and changed the two 0-rings. Situation remains the same.
 
Reply
Old Jul 23, 2012 | 01:45 AM
  #2  
JagV8's Avatar
Veteran Member
15 Year Member
Liked
Loved
Community Favorite
Joined: May 2009
Posts: 27,505
Likes: 4,902
From: Yorkshire, England
Default

Could easily be a pulley or the idler or a worn belt. EIther pester the mechanic or find another
 
Reply
Old Jul 23, 2012 | 09:18 AM
  #3  
Mikey's Avatar
Joined: Oct 2009
Posts: 11,057
Likes: 2,271
From: Perth Ontario Canada
Default

Originally Posted by sancho panza
I have nowhere I trust to take this problem to.
I don't know of any Indys in the Ottawa area but here's the local main dealer

Ottawa's Official Land Rover / Jaguar Dealership
 
Reply
Old Jul 24, 2012 | 08:58 PM
  #4  
sancho panza's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2012
Posts: 3
Likes: 0
From: Ottawa
Default

Hi Vet, I have taken off the pully belt and all pully disengaged. Noise is still there. All electric motors within engine compactment tested without any fault. Noise is still coming and going at will. What confusses me most is that this car is like new when in motion outside idle state. My mechanic diagnostic system states, "gas lean in banks 1&2". I don't know what part to change.
 
Reply
Old Jul 25, 2012 | 01:04 AM
  #5  
JagV8's Avatar
Veteran Member
15 Year Member
Liked
Loved
Community Favorite
Joined: May 2009
Posts: 27,505
Likes: 4,902
From: Yorkshire, England
Default

You need the codes (they're a letter then 4 digits) then you can Search on here for existing threads and fixes. Also need to put your car details in your signature.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PMKimpton
X-Type ( X400 )
15
Aug 3, 2019 08:22 PM
steve_k_xk
Non-Jaguar Vehicles
4
May 17, 2016 05:29 AM
Raul Lara
New Member Area - Intro a MUST
10
Sep 14, 2015 07:31 PM
Raul Lara
X-Type ( X400 )
1
Sep 2, 2015 05:23 PM
innzane
X-Type ( X400 )
0
Sep 2, 2015 10:08 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:39 PM.