seats in good shape after an accident so I bought to put into a project vehicle. The passenger side works fine but the Drivers side does not. The motors work but I'm guessing the module is the issue. I think, from readings, that I can switch out the passenger side and if that works, then buy the replacement module to put into the driver side. May just get a replacement for the passenger as I am not interested in the memory part of the module for the driver side.
would like to know if I'm on the right track.

 

Welcome to the forum, Moveslow. I can't speak for the track...but you are on the wrong forum....make sure you pop into the new member's area and introduce yourself so you can get a proper welcome and read the rules and guidelines for a pleasant experience.

Then find your way to the S-Type forum. You have landed in the forum for 1995-1997 XJ-6's.

Beware, the seat wiring was changed sometime between MY-05 and MY-07.
A friend had a spare set of heated 07 seats....when fit to my 03 or 05...they were "no-move" rather than movingSlow when the switches were actuated.

 

Hi moveslow,

Welcome to the Jaguar Forums! It's great to have you with us.

I have moved your post to the forum for the S-Type where you will find knowledgeable owners of similar cars.

While you're waiting for some replies, please visit the New Member Area - Intro a MUST and post a required introduction so we can learn something about you and your Jaguar and give you a proper welcome.

Cheers,

Don